Messages in this thread | | | Date | Sun, 13 Feb 2000 14:12:19 -0500 | From | Jens Axboe <> | Subject | Re: 2.3.43: IDE CD mount(8) hangs; ditto SysRq |
| |
On Sat, Feb 12 2000, Andre Hedrick wrote: > > 2.2.15pre6 and 2.3.42aa3 gave: > > > > kernel: hdd: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error } > > kernel: hdd: ide_wait_noerr: error=0xb4 > > kernel: hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } > > kernel: hdd: set_drive_speed_status: error=0xb4 > > kernel: hdd: ATAPI 40X CD-ROM drive, 128kB Cache, DMA > > kernel: Uniform CD-ROM driver Revision: 3.06 > > > > (Revision 2.56 doesn't give any of this nonsense) > > Translation of "this nonsense"...... > > Your CDROM can not handle the full throttle auto-tuning, the is a problem > with the device's firmware or other hardware. If your drive behaved well > and responded correctly to the active-hardware correction of the BIOS > settings, it would have never barffed the message.
I've got more reports exactly like this one -- when did this start to happen?
> > It is identified as CRD-8400C, ATAPI CDROM drive, alone on ide1. > > It most likely belongs on a capablities list of short comings.
Are you sure? It's not us being too optimistic?
-- * Jens Axboe <axboe@suse.de> * Linux CD-ROM Maintainer * http://www.kernel.dk
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |