lkml.org 
[lkml]   [2000]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.3.43: IDE CD mount(8) hangs; ditto SysRq


    On Sat, 12 Feb 2000, Horst von Brand wrote:

    > Sorry, but from the moment I got this machine (2.3.20 or so) 2.3.x gave
    > severe filesystem corruption on it. I tried several 2.3.x on and off, the
    > first one I tried that was stable enough for any use was 2.3.42aa2. It has
    > the same problem. I don't remember for sure if I tried 2.3.x before with
    > CDs (I had other worries :).
    >
    > 2.2.15pre6 and 2.3.42aa3 gave:
    >
    > kernel: hdd: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error }
    > kernel: hdd: ide_wait_noerr: error=0xb4
    > kernel: hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
    > kernel: hdd: set_drive_speed_status: error=0xb4
    > kernel: hdd: ATAPI 40X CD-ROM drive, 128kB Cache, DMA
    > kernel: Uniform CD-ROM driver Revision: 3.06
    >
    > (Revision 2.56 doesn't give any of this nonsense)

    Translation of "this nonsense"......

    Your CDROM can not handle the full throttle auto-tuning, the is a problem
    with the device's firmware or other hardware. If your drive behaved well
    and responded correctly to the active-hardware correction of the BIOS
    settings, it would have never barffed the message.

    > It is identified as CRD-8400C, ATAPI CDROM drive, alone on ide1.

    It most likely belongs on a capablities list of short comings.

    Andre Hedrick
    The Linux ATA/IDE guy


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:56    [W:0.040 / U:1.696 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site