Messages in this thread |  | | Date | Wed, 06 Dec 2000 13:17:23 -0800 | From | James Lamanna <> | Subject | Re: Problems with PDC202xx driver |
| |
So you are saying that the Promise Fasttrak 100 chipset is designed wrong? Because that's exactly what I have. and isn't this driver supposed to support it? Or are you saying the IDE controller on the MB is wrong?
Andre Hedrick wrote: > > <4>ide: Assuming 33MHz system bus speed for PIO modes > <4>AMD7409: IDE controller on PCI bus 00 dev 39 > <4>AMD7409: chipset revision 7 > <4>AMD7409: not 100% native mode: will probe irqs later > <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA > <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA > <4>PDC20267: IDE controller on PCI bus 00 dev 48 > <4>PDC20267: chipset revision 2 > <4>PDC20267: not 100% native mode: will probe irqs later > <4>PDC20267: ROM enabled at 0xe8000000 > <4>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. > <4> ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio > <4> ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:DMA, hdh:pio > <4>hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive > <4>hdb: QUANTUM FIREBALL CR4.3A, ATA DISK drive > <4>hdc: ATAPI CD ROM DRIVE 50X MAX, ATAPI CDROM drive > <4>hde: Maxtor 91536H2, ATA DISK drive > <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > <4>ide1 at 0x170-0x177,0x376 on irq 15 > <4>ide2 at 0xc400-0xc407,0xc802 on irq 11 > > Nope you have a chipset that is designed wrong. > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |