Messages in this thread |  | | Date | Mon, 4 Dec 2000 10:13:09 -0500 | From | "J. Nick Koston" <> | Subject | Nightly usb oops |
| |
My machine crashes almost every night with this oops. I've finally managed to catch it before it was totally gone.
ksymoops 2.3.4 on i686 2.4.0-test10. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.0-test10 (specified) -m /boot/System.map-2.4.0-test10 (specified)
Warning (compare_maps): snd symbol pm_register not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry Warning (compare_maps): snd symbol pm_send not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry Warning (compare_maps): snd symbol pm_unregister not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000) 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580) 0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000) 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000) 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580) 0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000) 0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000) 0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000) 0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80) 0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000) 0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000) 0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80) 0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000) 0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000) 0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300) 0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80) 0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98) 0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0) 0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8) 0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000) 0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300) 0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90) 0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98) 0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0) 0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8) 0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000) 0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300) 0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80) 0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98) 0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0) 0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8) 0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000) 0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300) 0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90) 0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98) 0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0) 0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8) 0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000) 0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300) 0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80) 0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88) 0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90) 0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98) 0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0) 0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8) 0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0) 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000) Unable to handle kernel NULL pointer dereference at virtual address 00000014 c01faed6 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c01faed6>] Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010282 eax: 00000008 ebx: cbd41385 ecx: cbd41380 edx: 00000008 esi: 00000000 edi: cfe12400 ebp: 00000001 esp: c14fdf0c ds: 0018 es: 0018 ss: 0018 Process khubd (pid: 7, stackpage=c14fd000) Stack: cbd41385 00000000 cfe12400 00000001 00000008 00000000 00000009 00000000 00000001 00000000 00000000 c01fb1f3 cfe12400 00000000 cfe12400 c5985802 cfe12400 00000000 cbd41380 cbd41380 c01fb7f1 cfe12400 00000001 00000000 Call Trace: [<c01fb1f3>] [<c01fb7f1>] [<c01fcc60>] [<c01fce32>] [<c0293580>] [<c0293647>] [<c01fcfa5>] [<c0105000>] [<c0108c03>] Code: 8b 42 0c c7 44 24 24 00 00 00 00 0f b6 72 04 39 74 24 24 0f
>>EIP; c01faed6 <usb_set_maxpacket+46/120> <===== Trace; c01fb1f3 <usb_set_configuration+e3/f0> Trace; c01fb7f1 <usb_new_device+171/1d0> Trace; c01fcc60 <usb_hub_port_connect_change+270/300> Trace; c01fce32 <usb_hub_events+142/270> Trace; c0293580 <usb_bandwidth_option+1bf8/28ec> Trace; c0293647 <usb_bandwidth_option+1cbf/28ec> Trace; c01fcfa5 <usb_hub_thread+45/70> Trace; c0105000 <empty_bad_page+0/1000> Trace; c0108c03 <kernel_thread+23/30> Code; c01faed6 <usb_set_maxpacket+46/120> 00000000 <_EIP>: Code; c01faed6 <usb_set_maxpacket+46/120> <===== 0: 8b 42 0c mov 0xc(%edx),%eax <===== Code; c01faed9 <usb_set_maxpacket+49/120> 3: c7 44 24 24 00 00 00 movl $0x0,0x24(%esp,1) Code; c01faee0 <usb_set_maxpacket+50/120> a: 00 Code; c01faee1 <usb_set_maxpacket+51/120> b: 0f b6 72 04 movzbl 0x4(%edx),%esi Code; c01faee5 <usb_set_maxpacket+55/120> f: 39 74 24 24 cmp %esi,0x24(%esp,1) Code; c01faee9 <usb_set_maxpacket+59/120> 13: 0f 00 00 sldt (%eax)
Unable to handle kernel NULL pointer dereference at virtual address 00000008 c013ed99 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c013ed99>] EFLAGS: 00010246 eax: 00000008 ebx: 00000000 ecx: 0000000c edx: 00000002 esi: 00000000 edi: 00000000 ebp: 00000008 esp: c36f3f08 ds: 0018 es: 0018 ss: 0018 Process initlog (pid: 532, stackpage=c36f3000) Stack: c36f2000 00000000 00000002 00000000 0000000c 0000000e c013eec3 00000002 00000008 c36f3f48 c36f3f4c c36f2000 00000002 00000002 00000000 c36f2000 00000000 00000000 c013f133 00000002 00000000 00000002 cbd41140 c36f3fb8 Call Trace: [<c013eec3>] [<c013f133>] [<c01203ed>] [<c010a637>] Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
>>EIP; c013ed99 <do_pollfd+29/b0> <===== Trace; c013eec3 <do_poll+a3/e0> Trace; c013f133 <sys_poll+233/350> Trace; c01203ed <sys_nanosleep+10d/190> Trace; c010a637 <system_call+33/38> Code; c013ed99 <do_pollfd+29/b0> 00000000 <_EIP>: Code; c013ed99 <do_pollfd+29/b0> <===== 0: 8b 45 00 mov 0x0(%ebp),%eax <===== Code; c013ed9c <do_pollfd+2c/b0> 3: 85 c0 test %eax,%eax Code; c013ed9e <do_pollfd+2e/b0> 5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0> Code; c013eda0 <do_pollfd+30/b0> 7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30> Code; c013eda5 <do_pollfd+35/b0> c: 89 c6 mov %eax,%esi Code; c013eda7 <do_pollfd+37/b0> e: bb 20 00 00 00 mov $0x20,%ebx Code; c013edac <do_pollfd+3c/b0> 13: 85 00 test %eax,(%eax)
Unable to handle kernel NULL pointer dereference at virtual address 00000040 c013ed99 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c013ed99>] EFLAGS: 00210246 eax: 00000040 ebx: 00000000 ecx: 00000044 edx: 00000006 esi: 00000000 edi: 00000000 ebp: 00000040 esp: c09a7f08 ds: 0018 es: 0018 ss: 0018 Process deskguide_apple (pid: 835, stackpage=c09a7000) Stack: c09a6000 00000000 00000006 00000000 00000044 00000046 c013eec3 00000006 00000040 c09a7f48 c09a7f4c c09a6000 00000006 00000006 00000000 c09a6000 00000000 00000000 c013f133 00000006 00000000 00000006 cbd41880 c09a7fb8 Call Trace: [<c013eec3>] [<c013f133>] [<c010a637>] Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
>>EIP; c013ed99 <do_pollfd+29/b0> <===== Trace; c013eec3 <do_poll+a3/e0> Trace; c013f133 <sys_poll+233/350> Trace; c010a637 <system_call+33/38> Code; c013ed99 <do_pollfd+29/b0> 00000000 <_EIP>: Code; c013ed99 <do_pollfd+29/b0> <===== 0: 8b 45 00 mov 0x0(%ebp),%eax <===== Code; c013ed9c <do_pollfd+2c/b0> 3: 85 c0 test %eax,%eax Code; c013ed9e <do_pollfd+2e/b0> 5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0> Code; c013eda0 <do_pollfd+30/b0> 7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30> Code; c013eda5 <do_pollfd+35/b0> c: 89 c6 mov %eax,%esi Code; c013eda7 <do_pollfd+37/b0> e: bb 20 00 00 00 mov $0x20,%ebx Code; c013edac <do_pollfd+3c/b0> 13: 85 00 test %eax,(%eax)
3 warnings issued. Results may not be reliable. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |