lkml.org 
[lkml]   [2000]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: SCSI Problems since upgrade from 2.2.16
"George R. Kasica" wrote:
>
> Hello:
>
> I'm running an HP DAT 4mm Autochanger here and since going to 2.2.17
> and 2.2.18 I'm seeing failures when it attempts to unload the tape and
> load a new one while backing up using BRU PE...utilizing the mt or mtx
> commands as follows:
>
> mt -f $DEV rewoffl 2>&1 >/dev/null
>
> OR
>
> /usr/local/bin/mtx -f /dev/sg1 eject 2>&1 >/dev/null
>
> If I use the MTX command set to "manually" change the tapes all is
> well....any thoughts on the cause or a fix...I don't think the
> hardware is broken due to the fact it runs fine "manually" by doing
> the mtx -f /dev/sg1 next commnand to load the next tape
>
> Pertinent info below:
>
> Information about installed SCSI devices
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: SEAGATE Model: ST32550N Rev: 0021
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
> Vendor: HP Model: C1553A Rev: NS01
> Type: Sequential-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 01
> Vendor: HP Model: C1553A Rev: NS01
> Type: Medium Changer ANSI SCSI revision: 02

While I am not familiar with mtx and the process you
are having problems with, 'man 1 mtx' contains the
following:
The first argument, given following -f, is the SCSI
generic device corresponding to your media changer.

On the basis of the /proc/scsi/scsi output you have shown,
the mtx commands should read "mtx -f /dev/sg2 ..."
(not /dev/sg1) as you have noted at the top.

Given those 2 sg devices are closely coupled (just
differing by the lun) mtx probably can sort this out.

Doug Gilbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.032 / U:24.968 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site