lkml.org 
[lkml]   [2000]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: NETDEV WATCHDOG: eth0: transmit timed out
David wrote:
>
> Same old story, bugger still does it. Have to set the link down/up to
> get it running again.
>
> 00:12.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev
> 20)
>

I missed your earlier mails, could you resend the details?
I'm interested in the output from

tulip-diag -m -a -f

before and after a link failure.


I'm aware that the tulip drivers doesn't handle cable disconnects and
reconnects with MII pnic cards. I have a patch for that problem, but it
affects _all_ MII tulip cards, and thus it won't be included soon. If
tulip-diag says "10mbps-serial", then you have run into that bug.

--
Manfred
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.034 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site