[lkml]   [2000]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectOops with microcode update driver on 2.2.19pre3

I am getting the following oops while trying to update the microcode of a
PII@266mhz using the microcode update driver. Below is the output of
ksymoops. This was built using egcs-1.1.2.

Also in case it matters I've applied the ide-2.2.18 patch so I can use my
Promise ATA66 controller and the latest reiserfs patch..



ksymoops 0.7c on i686 2.2.19pre3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.2.19pre3/ (default)
-m /usr/src/linux/ (default)

No modules in ksyms, skipping objects
Warning (read_lsmod): no symbols in lsmod, is /proc/modules a valid lsmod file?
Unable to handle kernel paging request at virtual address c823e12c
current->tss.cr3 = 05e9b000, %cr3 = 05e9b000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01078b1>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 00000006 ebx: 00000000 ecx: 00000000 edx: bf87933c
esi: c023e120 edi: c6c31000 ebp: c5e9c000 esp: c5e9df4c
ds: 0018 es: 0018 ss: 0018
Process microcode_ctl (pid: 1011, process nr: 48, stackpage=c5e9d000)
Stack: c6c31000 c5e9c000 00250000 06101c8c 00000000 c8a50000 c8a34000 00000000
c010782d 00000000 0001b800 c5e84540 c6c31000 c5e9c000 c0107c21 c5bcabb0
ffffffea c01245c9 c5e84540 bf85db3c 0001b800 c5e84554 c5e9c000 00000003
Call Trace: [<c8a50000>] [<c8a34000>] [<c010782d>] [<c0107c21>] [<c01245c9>] [<c0107b38>] [<c01094e8>]
Code: a1 2c e1 23 c8 a8 01 74 5a 6a 00 68 20 78 20 c0 e8 d2 bc 00

>>EIP; c01078b1 <do_update_one+39/20c> <=====
Trace; c8a50000 <END_OF_CODE+87ae578/????>
Trace; c8a34000 <END_OF_CODE+8792578/????>
Trace; c010782d <do_microcode_update+d/58>
Trace; c0107c21 <microcode_write+e9/120>
Trace; c01245c9 <sys_write+e5/118>
Trace; c0107b38 <microcode_write+0/120>
Trace; c01094e8 <system_call+34/38>
Code; c01078b1 <do_update_one+39/20c>
00000000 <_EIP>:
Code; c01078b1 <do_update_one+39/20c> <=====
0: a1 2c e1 23 c8 mov 0xc823e12c,%eax <=====
Code; c01078b6 <do_update_one+3e/20c>
5: a8 01 test $0x1,%al
Code; c01078b8 <do_update_one+40/20c>
7: 74 5a je 63 <_EIP+0x63> c0107914 <do_update_one+9c/20c>
Code; c01078ba <do_update_one+42/20c>
9: 6a 00 push $0x0
Code; c01078bc <do_update_one+44/20c>
b: 68 20 78 20 c0 push $0xc0207820
Code; c01078c1 <do_update_one+49/20c>
10: e8 d2 bc 00 00 call bce7 <_EIP+0xbce7> c0113598 <printk+0/16c>

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.081 / U:2.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site