Messages in this thread | | | Date | Tue, 19 Dec 2000 17:05:16 -0700 | From | "Jeff V. Merkey" <> | Subject | Re: PCMCIA modem (v.90 X2) not working with 2.4.0-test12 PCMCIA services |
| |
On Tue, Dec 19, 2000 at 01:51:14PM -0800, David Hinds wrote: > On Tue, Dec 19, 2000 at 03:41:29PM -0700, Jeff V. Merkey wrote: > > > > On a related topic, the 3c575_cb driver on an IBM Thinkpad 765D is getting > > tx errors on the 2.2.18 kernel with PCMCIA services 3.1.22. > > > > Card is a 3Com 3CCFE575BT Cyclone Cardbus Adapter. > > > > Error is: > > > > eth0: transmit timed out, tx_status 00 status e000. > > diagnostics net 0cc2 media a800 dma 000000a0 > > What host bridge is in the 765D? Is it perhaps a TI 1131 rev 1, or > something else? Also, try adding: >
/proc/bus/pccard/00/info reports TI 1130 chipset.
> module "3c575_cb" opts "down_poll_rate=0"
Adding this does not fix the problem, but does cause a little more error info to get printed. Now in addition to the original message, I am also seeing:
eth0: Tx ring full, refusing to send buffer.
Looks like some type of interrupt problem. I am available to assist you in debugging this problem.
Jeff
> > to /etc/pcmcia/config.opts and see if that makes any difference. > > -- Dave > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
| |