[lkml]   [2000]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Still "eth0: trigger_send() called with the transmitter busy" in 2.4.0-test12

On Tue, 12 Dec 2000 18:46:42 +0100, Juan blurted forth:

> Hi!
> This error exists since 2.4.0-test10preX or so. It occurs when the
> network interface is activated.
> I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
> Plug and Play ISA Adapter". I'm unable to access the Internet because
> the ethernet card doesn't work :-(. Besides, the card uses two
> interrupts (?) and there are two interfaces (eth0 y eth1) when I have
> only one (?).
> --- Next Part ---
> Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0
> Logical device 0 'RTL8019:Unknown'
> Supported registers 0x2
> Compatible device PNP80d6
> Device is active
> Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
> Active IRQ 255 [0xff],255 [0xff]
> Active DMA 255,255
> Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
> Resources 0
> Priority preferred
> Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
> IRQ 3,4,5,2/9,10,11,12,15 High-Edge

try loading the rtl81*.o module(s) until it works right... you should
see a message for eth1 in dmesg about it

.oO gnea at rochester dot rr dot com Oo.
.oO url: Oo.

"You can tune a filesystem, but you can't tuna fish" -unknown

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:28    [W:0.051 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site