Messages in this thread |  | | Date | Fri, 01 Dec 2000 13:55:25 +0100 | From | "Udo A. Steinberg" <> | Subject | Re: eepro100 driver update for 2.4 |
| |
Andrey Savochkin wrote: > > > eth0: card reports no RX buffers. > > eth0: card reports no resources.
> It's a known issue. > I've been promised that this issue would be looked up in Intel's errata by > people who had the access to it, but I haven't got the results yet.
I just figured out something interesting. Apparently there's a small timing problem with setting up the NIC: If I put in a sleep 1 between setting up the interface and setting up the gateway route, everything works pretty well.
So things now look like this:
/sbin/ifconfig lo 127.0.0.1 /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
/sbin/ifconfig eth0 a.b.c.d broadcast x.y.225.255 netmask 255.255.255.0 /sbin/ifconfig eth0:0 a.b.c.d broadcast 172.16.255.255 netmask 255.255.0.0
sleep 1 # This does the trick
/sbin/route add default gw a.b.c.d netmask 0.0.0.0 metric 1
> The card itself doesn't report its revision in details. > It can be checked by `lspci'. > Rev 8 is 82559, if I remember, and rev 9 is 82559ER.
http://support.intel.com/support/network/adapter/pro100/21397.htm has a list of Board-Assembly IDs and the corresponding chip revisions.
Regards, Udo. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |