[lkml]   [2000]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.4.0-test10 3c509 crash (maybe)

Hello, with test10 I get this oops during boot, at the moment of
initializing eth0 (a 3c509b, loaded as module). What looks strange is
that the decoded oops shows stuff from the awe32 sound card that was
initalized right before this:

Unable to handle kernel NULL pointer dereference at virtual address 00000070
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<ca8cb5a5>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: dd24a000 ebx: 00000004 ecx: 00000070 edx: 00000070
esi: 00000000 edi: 00000003 ebp: 00000300 esp: c5e97f08
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 116, stackpage=c5e97000)
Stack: 00000000 00000000 ca8cb04e ffffffea c5e97f3c c5e97f2c 00000070 0000000a
51ff0001 ca8cb04e ffffffea c1044010 c02ade0c dd24a000 ffff1139 ca8cc209
00000000 ca8cb000 00000001 c0117888 c5e96000 400299cc bfffe0c4 bfffe084
Call Trace: [<ca8cb04e>] [<ca8cb04e>] [<dd24a000>] [<ffff1139>] [<ca8cc209>] [<ca8cb000>] [<c0117888>]
[<ca8cb048>] [<ca8a4000>] [<ca8cb048>] [<c010a32f>] [<c025002b>]
Code: 89 02 8b 44 24 38 66 89 42 04 8b 4c 24 40 89 69 20 8b 44 24

>>EIP; ca8cb5a5 <[3c509].text.start+545/6d4> <=====
Trace; ca8cb04e <[awe_wave].bss.end+124f/1261>
Trace; ca8cb04e <[awe_wave].bss.end+124f/1261>
Trace; dd24a000 <END_OF_CODE+128f6da0/????>
Trace; ffff1139 <END_OF_CODE+3569ded9/????>
Trace; ca8cc209 <[3c509]init_module+55/70>
Trace; ca8cb000 <[awe_wave].bss.end+1201/1261>
Trace; c0117888 <sys_init_module+3d0/440>
Trace; ca8cb048 <[awe_wave].bss.end+1249/1261>
Trace; ca8a4000 <[opl3]__module_parm_io+143a/149a>
Trace; ca8cb048 <[awe_wave].bss.end+1249/1261>
Trace; c010a32f <system_call+33/38>
Trace; c025002b <IRQ0x9b_interrupt+3/8>
Code; ca8cb5a5 <[3c509].text.start+545/6d4>
0000000000000000 <_EIP>:
Code; ca8cb5a5 <[3c509].text.start+545/6d4> <=====
0: 89 02 mov %eax,(%edx) <=====
Code; ca8cb5a7 <[3c509].text.start+547/6d4>
2: 8b 44 24 38 mov 0x38(%esp,1),%eax
Code; ca8cb5ab <[3c509].text.start+54b/6d4>
6: 66 89 42 04 mov %ax,0x4(%edx)
Code; ca8cb5af <[3c509].text.start+54f/6d4>
a: 8b 4c 24 40 mov 0x40(%esp,1),%ecx
Code; ca8cb5b3 <[3c509].text.start+553/6d4>
e: 89 69 20 mov %ebp,0x20(%ecx)
Code; ca8cb5b6 <[3c509].text.start+556/6d4>
11: 8b 44 24 00 mov 0x0(%esp,1),%eax

Yes, ksymoops was using the right

I don't know if this may be related but in test9, despite all
functioning properly, I have this strange indication in /proc/modules:

3c509 7088 1 (autoclean)
isa-pnp 27280 0 (autoclean) [3c509]

I am pretty sure that the 3c509B is NOT an isa-pnp card (also pnpdump
shows nothing), and then, even if it be, shouldn't the isa-pnp module
be unloaded after setting up the card ?

Just to complete the scene, I had to add isapnp=0 to the options
passed to sb, to get it to work.

Is there a way that I can disable the isapnp module from the command
line without recompiling ?




Pierfrancesco Caci | ik5pvx | -
Firenze - Italia | Office for the Complication of Otherwise Simple Affairs
Linux penny 2.4.0-test9 #1 Wed Oct 4 11:51:25 CEST 2000 i686 unknown
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:45    [W:0.036 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site