[lkml]   [2000]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: ne2k/wd3018 driver
> Does anyone know why a Linux ethernet driver might appear to be up & 
> working (that is, no errors, ifconfig says UP, etc), and the board has a
> link light on it, but the hub link light is not on and no packets are
> transmitted or received? rmmod/insmod of the driver doesn't help.
> I have an ne2k/ISA Atlantic card that is doing this in either wd or ne mode
> with a 2.2.14 kernel, and can't get it running... help!

Plug the cable into the hub before powering up the chip ? I have at least one
crap ne2k clone that only does the detect at boot

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:45    [W:0.026 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site