Messages in this thread |  | | Date | Mon, 6 Nov 2000 11:53:56 -0600 (CST) | From | "Michael J. Dikkema" <> | Subject | Yikes!! messages in aic7xxx.c |
| |
I'm hitting a message that looks similar to this: (I wrote it down..)
Yikes!! There is a loop in the free list No active SCB for reconnecting target Issuing BUS DEVICE RESET SAVED_TCL=0x0, ARG_1=0x3, SEQADR=0x11d
There is more, but this server needs to be running.
These are the scsi devices attached:
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 0/6/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 392 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4 <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> scsi : 1 host. (scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 16. Vendor: AccuRAID Model: AR-8600 Rev: Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 8. Vendor: OnStream Model: ADR50 Drive Rev: 2.20 Type: Sequential-Access ANSI SCSI revision: 02 Detected scsi tape st0 at scsi0, channel 0, id 2, lun 0 scsi : detected 2 SCSI generics 1 SCSI tape 1 SCSI disk total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 180076544 [87928 MB] [87.9 GB]
I can reliably hit this whenever I copy 200-600mb of data from a windows machine to this box over samba. We've tried changing the ram in the RAID array, but that has had no effect.
Any help would be appreciated. Thanks.
,.;:: : Michael J. Dikkema | Systems / Network Admin - Internet Solutions, Inc. | http://www.moot.mb.ca Work: (204) 982-1060 ; mjd@moot.mb.ca ',.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |