lkml.org 
[lkml]   [2000]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [HARDLOCK] 2.2.17 locks up hard on Ultra66/PDC20262 in DMA mode when using ide + raid-A0 + eepro100 patches
UPDATE:

Now I have upgraded to 2.2.18pre19 + ide-2.2.18pre18 + raid-2.2.18-A2 +
patched eepro100.

Unfortunately, I still get:

hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=15347359,
sector=15347328
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=15347359,
sector=15347328
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=15347359,
sector=15347328
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=15347359,
sector=15347328


after a few minutes/hours of uptime (60-180 minutes). I even tried some
SysRq keys and those wouldn't work. (hard lockup). So what do I try from
here? I d'nt think there is any way to disable DMA in the hardware (on
the Promise anyway). Should I pull out hde and throw in another seagate?

thanks for any ideas.

-dan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:45    [W:0.037 / U:1.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site