[lkml]   [2000]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: test-10 tulip "eth0 timed out" (smp, heavy IDE use)
    In article <20001128042134.A1041@twoey> you wrote:

    > Using 2.4-test10 I got a series of timeout errors on my tulip network
    > card (Linksys LNE version 4, 00:0d.0 Ethernet controller: Bridgecom,
    > Inc: Unknown device 0985 (rev 11)). Networking then completely stopped
    > working. Restarting the interface with ifconfig fixed the problem.

    > I am using an SMP kernel, compiled with gcc 2.95.2 on an ABit BP6 (dual
    > celeron 500s, 128mb, PIIX4 using DMA).

    > [log extract]
    > Nov 28 04:04:52 twoey kernel: NETDEV WATCHDOG: eth0: transmit timed out
    > Nov 28 04:04:52 twoey kernel: eth0: Transmit timed out, status fc664010,
    > CSR12 00000000, resetting...

    I have the same problem with SMSC EPIC/100 83c170 Ethernet controller:

    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: Transmit timeout using MII device, Tx status 0003.
    eth0: Restarting the EPIC chip, Rx 4568454/4568454 Tx 6262613/6262623.
    eth0: epic_restart() done, cmd status 000a, ctl 0512 interrupt 240000.

    kernel 2.4.0-test11

    *[ Łukasz Trąbiński ]*
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 12:47    [W:15.017 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site