lkml.org 
[lkml]   [2000]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
I can not mount an  cd in either my cdrom or cdrw drives. Both are ide
drives using scsi-ide emulation.

During the mount the logs show:

Nov 23 10:03:27 hindleyhome kernel: VFS: Disk change detected on device sr(11,0)
Nov 23 10:03:29 hindleyhome kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Nov 23 10:03:29 hindleyhome kernel: ISO 9660 Extensions: RRIP_1991A
Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0
Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0
Nov 23 10:05:38 hindleyhome kernel: MSDOS: Hardware sector size is 2048
Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0
Nov 23 10:05:38 hindleyhome kernel: FAT bread failed
Nov 23 10:05:38 hindleyhome kernel: MSDOS: Hardware sector size is 2048
Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0
Nov 23 10:05:38 hindleyhome kernel: FAT bread failed

The boot logs are:

Nov 23 09:00:48 hindleyhome kernel: Linux version 2.4.0-test11 (root@HindleyHome) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #59 Thu Nov 23 08:54:15 GMT 2000
(...)
Nov 23 09:00:48 hindleyhome kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Nov 23 09:00:48 hindleyhome kernel: ide-cd: passing drive hdd to ide-scsi emulation.
(...)
Nov 23 09:00:48 hindleyhome kernel: SCSI subsystem driver Revision: 1.00
Nov 23 09:00:48 hindleyhome kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Nov 23 09:00:48 hindleyhome kernel: Vendor: YAMAHA Model: CRW4416E Rev: 1.0h
Nov 23 09:00:48 hindleyhome kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 23 09:00:48 hindleyhome kernel: Vendor: PIONEER Model: CD-ROM DR-A24X Rev: 1.04
Nov 23 09:00:48 hindleyhome kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 23 09:00:48 hindleyhome kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Nov 23 09:00:48 hindleyhome kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
Nov 23 09:00:48 hindleyhome kernel: sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
Nov 23 09:00:48 hindleyhome kernel: Uniform CD-ROM driver Revision: 3.11
Nov 23 09:00:48 hindleyhome kernel: sr1: scsi3-mmc drive: 20x/20x
xa/form2 cdda tray

I have now reverted to test10 with the same setup and all works fine.

Hope that is useful

Mark
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:47    [W:0.030 / U:7.516 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site