lkml.org 
[lkml]   [2000]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjecti82365 PCI-PCMCIA bridge still not working in 2.4.0-test11
    Hi,

    Installed kernel 2.4.0-test11 on my Debian Woody box today. Had no
    problem apart from getting PCMCIA to work. I have a PCI-PCMCIA adapter
    on my desktop PC, using the Cirrus Logic CL6729 chipset; on a 2.2.x
    kernel it is detected as an i82365 and works accordingly.

    After trying 2.4.0-test9 and -test10 (which don't support i82365), it
    was nice to see that test11-pre6 finally has regained PCMCIA support...
    so it's weird to encounter this problem. Has anyone managed to use the
    i82365 kernel module?

    relevant kernel config:

    PCMCIA support compiled as a module
    i82365 as a module
    CardBus (yenta_socket) as a module

    Attached are the result of running /etc/init.d/pcmcia start and the
    error message from dmesg

    Any help appreciated... and looking forward to test12... or will it be
    2.4.0-final, finally?

    :)

    Regards,

    Michel Salim
    Starting PCMCIA services: modulesHint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
    Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
    cardmgr.
    /lib/modules/2.4.0-test11/pcmcia/i82365.o: init_module: No such device
    ds: no socket drivers loaded!
    /lib/modules/2.4.0-test11/pcmcia/ds.o: init_module: Operation not permitted
    \
     
     \ /
      Last update: 2005-03-22 12:47    [W:0.036 / U:61.004 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site