lkml.org 
[lkml]   [2000]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] fix help info about OSB4 and VIA82CXXX IDE chipsets (test11)

Hi

- OSB4 isn't marked (EXPERIMENTAL) in drivers/ide/Config.in so it
shouldn't be marked so in Configure.help.
- PDC202XX driver also supports PDC20265.
- new VIA82CXXX driver removed kernel command line option (FIFO
setting) and CONFIG_VIA82CXX_TUNING

--
Bartlomiej Zolnierkiewicz
<bkz@linux-ide.org>


--- linux-240t11/drivers/ide/Configure.help Sun Nov 19 00:22:49 2000
+++ linux/drivers/ide/Configure.help Tue Nov 21 15:45:16 2000
@@ -868,9 +868,9 @@
This is a driver for the OPTi 82C621 EIDE controller.
Please read the comments at the top of drivers/ide/opti621.c.

-ServerWorks OSB4 chipset support (EXPERIMENTAL)
+ServerWorks OSB4 chipset support
CONFIG_BLK_DEV_OSB4
- This driver adds PIO/DMA support for the Serverworks OSB4 chipset
+ This driver adds PIO/(U)DMA support for the ServerWorks OSB4 chipset.

Intel PIIXn chipsets support
CONFIG_BLK_DEV_PIIX
@@ -898,7 +898,7 @@

If unsure, say N.

-PROMISE PDC20246/PDC20262/PDC20267 support
+PROMISE PDC20246/PDC20262/PDC20265/PDC20267 support
CONFIG_BLK_DEV_PDC202XX
Promise Ultra33 or PDC20246
Promise Ultra66 or PDC20262
@@ -972,23 +972,15 @@
VIA82CXXX chipset support
CONFIG_BLK_DEV_VIA82CXXX
This allows you to to configure your chipset for a better use while
- running (U)DMA: it will allow you to enable efficiently the second
- channel dma usage, as it may not be set by BIOS. It allows you to
- pass a kernel command line at boot time in order to set fifo
- config. If no command line is provided, it will try to set fifo
+ running PIO/(U)DMA, it will allow you to enable efficiently the second
+ channel dma usage, as it may not be set by BIOS. It will try to set fifo
configuration at its best. It will allow you to get information from
- /proc/ide/via provided you enabled "proc" support.
+ /proc/ide/via provided you enabled "/proc file system" support.

Please read the comments at the top of drivers/ide/via82cxxx.c

If you say Y here, then say Y to "Use DMA by default when available"
as well.
-
- If unsure, say N.
-
-VIA82CXXX Tuning support (WIP)
-CONFIG_VIA82CXXX_TUNING
- Please read the comments at the top of drivers/ide/via82cxxx.c

If unsure, say N.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:47    [W:0.079 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site