lkml.org 
[lkml]   [2000]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] Make APM more reliable as a module
Date
From
Hi Linus,

This patch allows me to unload and load the apm driver module
more reliably. Apparently at least the BIOS on my Thinkpad does
not like the APM DriverVersion call being done more than once,
so I need to remeber the fact that I have already done this call.

Also, we should have been disengaging the APM interface when removing
the module to stop the BIOS sending us events (and expecting replies).

Last, we should be enabling the BIOS and engaging the interface a bit
earlier.

Please apply ...

Cheers,
Stephen
--
Stephen Rothwell, Open Source Researcher, Linuxcare, Inc.
+61-2-62628990 tel, +61-2-62628991 fax
sfr@linuxcare.com, http://www.linuxcare.com/
Linuxcare. Support for the revolution.

diff -ruN 2.4.0-test11/arch/i386/kernel/apm.c 2.4.0-test11-APM.1/arch/i386/kernel/apm.c
--- 2.4.0-test11/arch/i386/kernel/apm.c Mon Nov 20 14:05:17 2000
+++ 2.4.0-test11-APM.1/arch/i386/kernel/apm.c Tue Nov 21 12:54:48 2000
@@ -37,6 +37,7 @@
* Nov 1999, Version 1.11
* Jan 2000, Version 1.12
* Feb 2000, Version 1.13
+ * Nov 2000, Version 1.14
*
* History:
* 0.6b: first version in official kernel, Linux 1.3.46
@@ -144,6 +145,9 @@
* <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr.
* Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore
* interval is now configurable.
+ * 1.14: Make connection version persist across module unload/load.
+ * Enable and engage power management earlier.
+ * Disengage power management on module unload.
*
* APM 1.1 Reference:
*
@@ -344,9 +348,9 @@

static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
-static struct apm_user * user_list = NULL;
+static struct apm_user * user_list;

-static char driver_version[] = "1.13"; /* no spaces */
+static char driver_version[] = "1.14"; /* no spaces */

static char * apm_event_name[] = {
"system standby",
@@ -527,7 +531,7 @@
&dummy, &dummy))
return (eax >> 8) & 0xff;
*event = ebx;
- if (apm_bios_info.version < 0x0102)
+ if (apm_info.connection_version < 0x0102)
*info = ~0; /* indicate info not valid */
else
*info = ecx;
@@ -559,7 +563,7 @@
#ifdef ALWAYS_CALL_BUSY
clock_slowed = 1;
#else
- clock_slowed = (apm_bios_info.flags & APM_IDLE_SLOWS_CLOCK) != 0;
+ clock_slowed = (apm_info.bios_info.flags & APM_IDLE_SLOWS_CLOCK) != 0;
#endif
return 1;
}
@@ -670,15 +674,15 @@
{
u32 eax;

- if ((enable == 0) && (apm_bios_info.flags & APM_BIOS_DISENGAGED))
+ if ((enable == 0) && (apm_info.bios_info.flags & APM_BIOS_DISENGAGED))
return APM_NOT_ENGAGED;
if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL,
enable, &eax))
return (eax >> 8) & 0xff;
if (enable)
- apm_bios_info.flags &= ~APM_BIOS_DISABLED;
+ apm_info.bios_info.flags &= ~APM_BIOS_DISABLED;
else
- apm_bios_info.flags |= APM_BIOS_DISABLED;
+ apm_info.bios_info.flags |= APM_BIOS_DISABLED;
return APM_SUCCESS;
}
#endif
@@ -710,7 +714,7 @@
u32 edx;
u32 esi;

- if (apm_bios_info.version < 0x0102) {
+ if (apm_info.connection_version < 0x0102) {
/* pretend we only have one battery. */
if (which != 1)
return APM_BAD_DEVICE;
@@ -734,15 +738,15 @@
u32 eax;

if ((enable == 0) && (device == APM_DEVICE_ALL)
- && (apm_bios_info.flags & APM_BIOS_DISABLED))
+ && (apm_info.bios_info.flags & APM_BIOS_DISABLED))
return APM_DISABLED;
if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax))
return (eax >> 8) & 0xff;
if (device == APM_DEVICE_ALL) {
if (enable)
- apm_bios_info.flags &= ~APM_BIOS_DISENGAGED;
+ apm_info.bios_info.flags &= ~APM_BIOS_DISENGAGED;
else
- apm_bios_info.flags |= APM_BIOS_DISENGAGED;
+ apm_info.bios_info.flags |= APM_BIOS_DISENGAGED;
}
return APM_SUCCESS;
}
@@ -890,7 +894,7 @@
printk(KERN_CRIT "apm: Critical suspend was vetoed, expect armageddon\n" );
return 0;
}
- if (apm_bios_info.version > 0x100)
+ if (apm_info.connection_version > 0x100)
apm_set_power_state(APM_STATE_REJECT);
return 0;
}
@@ -993,13 +997,13 @@

case APM_USER_SUSPEND:
#ifdef CONFIG_APM_IGNORE_USER_SUSPEND
- if (apm_bios_info.version > 0x100)
+ if (apm_info.connection_version > 0x100)
apm_set_power_state(APM_STATE_REJECT);
break;
#endif
case APM_SYS_SUSPEND:
if (ignore_bounce) {
- if (apm_bios_info.version > 0x100)
+ if (apm_info.connection_version > 0x100)
apm_set_power_state(APM_STATE_REJECT);
break;
}
@@ -1064,7 +1068,7 @@
int err;

if ((standbys_pending > 0) || (suspends_pending > 0)) {
- if ((apm_bios_info.version > 0x100) && (pending_count-- <= 0)) {
+ if ((apm_info.connection_version > 0x100) && (pending_count-- <= 0)) {
pending_count = 4;
if (debug)
printk(KERN_DEBUG "apm: setting state busy\n");
@@ -1334,7 +1338,7 @@
unsigned short bx;
unsigned short cx;
unsigned short dx;
- unsigned short error;
+ int error;
unsigned short ac_line_status = 0xff;
unsigned short battery_status = 0xff;
unsigned short battery_flag = 0xff;
@@ -1351,7 +1355,7 @@
if ((cx & 0xff) != 0xff)
percentage = cx & 0xff;

- if (apm_bios_info.version > 0x100) {
+ if (apm_info.connection_version > 0x100) {
battery_flag = (cx >> 8) & 0xff;
if (dx != 0xffff) {
units = (dx & 0x8000) ? "min" : "sec";
@@ -1399,9 +1403,9 @@

p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
driver_version,
- (apm_bios_info.version >> 8) & 0xff,
- apm_bios_info.version & 0xff,
- apm_bios_info.flags,
+ (apm_info.bios_info.version >> 8) & 0xff,
+ apm_info.bios_info.version & 0xff,
+ apm_info.bios_info.flags,
ac_line_status,
battery_status,
battery_flag,
@@ -1417,7 +1421,7 @@
unsigned short bx;
unsigned short cx;
unsigned short dx;
- unsigned short error;
+ int error;
char * power_stat;
char * bat_stat;

@@ -1429,22 +1433,53 @@
sigfillset(&current->blocked);
current->tty = NULL; /* get rid of controlling tty */

- if (apm_bios_info.version > 0x100) {
+ if (apm_info.connection_version == 0) {
+ apm_info.connection_version = apm_info.bios_info.version;
+ if (apm_info.connection_version > 0x100) {
+ /*
+ * We only support BIOSs up to version 1.2
+ */
+ if (apm_info.connection_version > 0x0102)
+ apm_info.connection_version = 0x0102;
+ error = apm_driver_version(&apm_info.connection_version);
+ if (error != APM_SUCCESS) {
+ apm_error("driver version", error);
+ /* Fall back to an APM 1.0 connection. */
+ apm_info.connection_version = 0x100;
+ }
+ }
+ }
+
+ if (debug)
+ printk(KERN_INFO "apm: Connection version %d.%d\n",
+ (apm_info.connection_version >> 8) & 0xff,
+ apm_info.connection_version & 0xff);
+
+#ifdef CONFIG_APM_DO_ENABLE
+ if (apm_info.bios_info.flags & APM_BIOS_DISABLED) {
/*
- * We only support BIOSs up to version 1.2
+ * This call causes my NEC UltraLite Versa 33/C to hang if it
+ * is booted with PM disabled but not in the docking station.
+ * Unfortunate ...
*/
- if (apm_bios_info.version > 0x0102)
- apm_bios_info.version = 0x0102;
- if (apm_driver_version(&apm_bios_info.version) != APM_SUCCESS) {
- /* Fall back to an APM 1.0 connection. */
- apm_bios_info.version = 0x100;
+ error = apm_enable_power_management(1);
+ if (error) {
+ apm_error("enable power management", error);
+ return -1;
}
}
- if (debug && (smp_num_cpus == 1)) {
- printk(KERN_INFO "apm: Connection version %d.%d\n",
- (apm_bios_info.version >> 8) & 0xff,
- apm_bios_info.version & 0xff);
+#endif

+ if ((apm_info.bios_info.flags & APM_BIOS_DISENGAGED)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+ if (error) {
+ apm_error("engage power management", error);
+ return -1;
+ }
+ }
+
+ if (debug && (smp_num_cpus == 1)) {
error = apm_get_power_status(&bx, &cx, &dx);
if (error)
printk(KERN_INFO "apm: power status not available\n");
@@ -1469,7 +1504,7 @@
printk("unknown\n");
else
printk("%d%%\n", cx & 0xff);
- if (apm_bios_info.version > 0x100) {
+ if (apm_info.connection_version > 0x100) {
printk(KERN_INFO
"apm: battery flag 0x%02x, battery life ",
(cx >> 8) & 0xff);
@@ -1483,29 +1518,6 @@
}
}

-#ifdef CONFIG_APM_DO_ENABLE
- if (apm_bios_info.flags & APM_BIOS_DISABLED) {
- /*
- * This call causes my NEC UltraLite Versa 33/C to hang if it
- * is booted with PM disabled but not in the docking station.
- * Unfortunate ...
- */
- error = apm_enable_power_management(1);
- if (error) {
- apm_error("enable power management", error);
- return -1;
- }
- }
-#endif
- if ((apm_bios_info.flags & APM_BIOS_DISENGAGED)
- && (apm_bios_info.version > 0x0100)) {
- error = apm_engage_power_management(APM_DEVICE_ALL, 1);
- if (error) {
- apm_error("engage power management", error);
- return -1;
- }
- }
-
/* Install our power off handler.. */
if (power_off)
pm_power_off = apm_power_off;
@@ -1584,17 +1596,17 @@
*/
static int __init apm_init(void)
{
- if (apm_bios_info.version == 0) {
+ if (apm_info.bios_info.version == 0) {
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;
}
printk(KERN_INFO
"apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
- ((apm_bios_info.version >> 8) & 0xff),
- (apm_bios_info.version & 0xff),
- apm_bios_info.flags,
+ ((apm_info.bios_info.version >> 8) & 0xff),
+ (apm_info.bios_info.version & 0xff),
+ apm_info.bios_info.flags,
driver_version);
- if ((apm_bios_info.flags & APM_32_BIT_SUPPORT) == 0) {
+ if ((apm_info.bios_info.flags & APM_32_BIT_SUPPORT) == 0) {
printk(KERN_INFO "apm: no 32 bit BIOS support\n");
return -ENODEV;
}
@@ -1603,23 +1615,23 @@
* Fix for the Compaq Contura 3/25c which reports BIOS version 0.1
* but is reportedly a 1.0 BIOS.
*/
- if (apm_bios_info.version == 0x001)
- apm_bios_info.version = 0x100;
+ if (apm_info.bios_info.version == 0x001)
+ apm_info.bios_info.version = 0x100;

/* BIOS < 1.2 doesn't set cseg_16_len */
- if (apm_bios_info.version < 0x102)
- apm_bios_info.cseg_16_len = 0; /* 64k */
+ if (apm_info.bios_info.version < 0x102)
+ apm_info.bios_info.cseg_16_len = 0; /* 64k */

if (debug) {
printk(KERN_INFO "apm: entry %x:%lx cseg16 %x dseg %x",
- apm_bios_info.cseg, apm_bios_info.offset,
- apm_bios_info.cseg_16, apm_bios_info.dseg);
- if (apm_bios_info.version > 0x100)
+ apm_info.bios_info.cseg, apm_info.bios_info.offset,
+ apm_info.bios_info.cseg_16, apm_info.bios_info.dseg);
+ if (apm_info.bios_info.version > 0x100)
printk(" cseg len %x, dseg len %x",
- apm_bios_info.cseg_len,
- apm_bios_info.dseg_len);
- if (apm_bios_info.version > 0x101)
- printk(" cseg16 len %x", apm_bios_info.cseg_16_len);
+ apm_info.bios_info.cseg_len,
+ apm_info.bios_info.dseg_len);
+ if (apm_info.bios_info.version > 0x101)
+ printk(" cseg16 len %x", apm_info.bios_info.cseg_16_len);
printk("\n");
}

@@ -1647,16 +1659,16 @@
__va((unsigned long)0x40 << 4));
_set_limit((char *)&gdt[APM_40 >> 3], 4095 - (0x40 << 4));

- apm_bios_entry.offset = apm_bios_info.offset;
+ apm_bios_entry.offset = apm_info.bios_info.offset;
apm_bios_entry.segment = APM_CS;
set_base(gdt[APM_CS >> 3],
- __va((unsigned long)apm_bios_info.cseg << 4));
+ __va((unsigned long)apm_info.bios_info.cseg << 4));
set_base(gdt[APM_CS_16 >> 3],
- __va((unsigned long)apm_bios_info.cseg_16 << 4));
+ __va((unsigned long)apm_info.bios_info.cseg_16 << 4));
set_base(gdt[APM_DS >> 3],
- __va((unsigned long)apm_bios_info.dseg << 4));
+ __va((unsigned long)apm_info.bios_info.dseg << 4));
#ifndef APM_RELAX_SEGMENTS
- if (apm_bios_info.version == 0x100) {
+ if (apm_info.bios_info.version == 0x100) {
#endif
/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
_set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1);
@@ -1667,11 +1679,11 @@
#ifndef APM_RELAX_SEGMENTS
} else {
_set_limit((char *)&gdt[APM_CS >> 3],
- (apm_bios_info.cseg_len - 1) & 0xffff);
+ (apm_info.bios_info.cseg_len - 1) & 0xffff);
_set_limit((char *)&gdt[APM_CS_16 >> 3],
- (apm_bios_info.cseg_16_len - 1) & 0xffff);
+ (apm_info.bios_info.cseg_16_len - 1) & 0xffff);
_set_limit((char *)&gdt[APM_DS >> 3],
- (apm_bios_info.dseg_len - 1) & 0xffff);
+ (apm_info.bios_info.dseg_len - 1) & 0xffff);
}
#endif

@@ -1692,6 +1704,14 @@

static void __exit apm_exit(void)
{
+ int error;
+
+ if (((apm_info.bios_info.flags & APM_BIOS_DISENGAGED) == 0)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 0);
+ if (error)
+ apm_error("disengage power management", error);
+ }
misc_deregister(&apm_device);
remove_proc_entry("apm", NULL);
#ifdef CONFIG_MAGIC_SYSRQ
diff -ruN 2.4.0-test11/arch/i386/kernel/i386_ksyms.c 2.4.0-test11-APM.1/arch/i386/kernel/i386_ksyms.c
--- 2.4.0-test11/arch/i386/kernel/i386_ksyms.c Mon Nov 20 14:05:17 2000
+++ 2.4.0-test11-APM.1/arch/i386/kernel/i386_ksyms.c Tue Nov 21 11:18:32 2000
@@ -68,7 +68,7 @@
EXPORT_SYMBOL(pm_idle);
EXPORT_SYMBOL(pm_power_off);
EXPORT_SYMBOL(get_cmos_time);
-EXPORT_SYMBOL(apm_bios_info);
+EXPORT_SYMBOL(apm_info);
EXPORT_SYMBOL(gdt);

EXPORT_SYMBOL_NOVERS(__down_failed);
diff -ruN 2.4.0-test11/arch/i386/kernel/setup.c 2.4.0-test11-APM.1/arch/i386/kernel/setup.c
--- 2.4.0-test11/arch/i386/kernel/setup.c Mon Nov 20 14:05:17 2000
+++ 2.4.0-test11-APM.1/arch/i386/kernel/setup.c Tue Nov 21 11:18:53 2000
@@ -126,7 +126,7 @@
*/
struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
-struct apm_bios_info apm_bios_info;
+struct apm_info apm_info;
struct sys_desc_table_struct {
unsigned short length;
unsigned char table[0];
@@ -608,7 +608,7 @@
ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV);
drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
- apm_bios_info = APM_BIOS_INFO;
+ apm_info.bios_info = APM_BIOS_INFO;
if( SYS_DESC_TABLE.length != 0 ) {
MCA_bus = SYS_DESC_TABLE.table[3] &0x2;
machine_id = SYS_DESC_TABLE.table[0];
diff -ruN 2.4.0-test11/include/linux/apm_bios.h 2.4.0-test11-APM.1/include/linux/apm_bios.h
--- 2.4.0-test11/include/linux/apm_bios.h Mon Feb 21 15:37:09 2000
+++ 2.4.0-test11-APM.1/include/linux/apm_bios.h Tue Nov 21 11:19:24 2000
@@ -38,7 +38,7 @@
unsigned short dseg_len;
};

- /* Results of APM Installation Check */
+/* Results of APM Installation Check */
#define APM_16_BIT_SUPPORT 0x0001
#define APM_32_BIT_SUPPORT 0x0002
#define APM_IDLE_SLOWS_CLOCK 0x0004
@@ -46,6 +46,14 @@
#define APM_BIOS_DISENGAGED 0x0010

/*
+ * Data for APM that is persistant across module unload/load
+ */
+struct apm_info {
+ struct apm_bios_info bios_info;
+ unsigned short connection_version;
+};
+
+/*
* The APM function codes
*/
#define APM_FUNC_INST_CHECK 0x5300
@@ -91,12 +99,9 @@
#define APM_FUNC_TIMER_GET 2

/*
- * in init/main.c
+ * in arch/i386/kernel/setup.c
*/
-extern struct apm_bios_info apm_bios_info;
-
-extern int apm_register_callback(int (*callback)(apm_event_t));
-extern void apm_unregister_callback(int (*callback)(apm_event_t));
+extern struct apm_info apm_info;

#endif /* __KERNEL__ */

@@ -176,7 +181,7 @@
/*
* This is the "All Devices" ID communicated to the BIOS
*/
-#define APM_DEVICE_BALL ((apm_bios_info.version > 0x0100) ? \
+#define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \
APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
#endif

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 12:47    [W:0.039 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site