lkml.org 
[lkml]   [2000]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[FIXED!] Re: [PATCH] pcmcia event thread. (fwd)
It's time for a week long party!

It works great, interrupts are even delivered to the tulip handler :)

Attached is the boot dmesg in case any aesthetic changes are desired.

Ted, please scratch off the NEC Versa LX PCMCIA entries as fixed, I assume this patch will go in on the
next release.

MEGA thank yous,
-d

----
PCI: BIOS32 Service Directory structure at 0xc00fdb70
PCI: BIOS32 Service Directory entry at 0xfdb80
PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=01
PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: IDE base address fixup for 00:07.1
PCI: Scanning for ghost devices on bus 0
PCI: Scanning for ghost devices on bus 1
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xc00f5a80
00:01 slot=00 0:60/0420 1:00/0000 2:00/0000 3:00/0000
00:03 slot=00 0:60/0420 1:61/0420 2:00/0000 3:00/0000
00:04 slot=00 0:61/0420 1:00/0000 2:00/0000 3:00/0000
00:05 slot=00 0:60/0420 1:00/0000 2:00/0000 3:00/0000
00:07 slot=00 0:fe/4000 1:ff/8000 2:00/0000 3:63/0200
00:11 slot=01 0:60/0420 1:61/0420 2:62/0800 3:61/0420
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: IRQ fixup
00:03.0: ignoring bogus IRQ 255
00:03.1: ignoring bogus IRQ 255
IRQ for 00:03.0(0) via 00:03.0 -> PIRQ 60, mask 0420, excl 0000 -> got IRQ 10
PCI: Found IRQ 10 for device 00:03.0
PCI: The same IRQ used for device 01:00.0
IRQ for 00:03.1(1) via 00:03.1 -> PIRQ 61, mask 0420, excl 0000 -> got IRQ 5
PCI: Found IRQ 5 for device 00:03.1
PCI: The same IRQ used for device 00:04.0
PCI: Allocating resources
PCI: Resource e0000000-efffffff (f=1208, d=0, p=0)
PCI: Resource 0000ec00-0000ecff (f=101, d=0, p=0)
PCI: Resource 0000ffa0-0000ffaf (f=101, d=0, p=0)
PCI: Resource 0000ef80-0000ef9f (f=101, d=0, p=0)
PCI: Resource fd000000-fdffffff (f=200, d=0, p=0)
PCI: Resource 0000dc00-0000dcff (f=101, d=0, p=0)
PCI: Resource feaff000-feafffff (f=200, d=0, p=0)
PCI: Sorting device list...
Limiting direct PCI/PCI transfers.

Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Yenta IRQ list 0898, PCI irq10
Socket status: 30000860
Yenta IRQ list 0898, PCI irq5
Socket status: 30000046

cs: cb_alloc(bus 2): vendor 0x1011, device 0x0019
PCI: Enabling device 02:00.0 (0000 -> 0003)
Linux Tulip driver version 0.9.11 (November 3, 2000)
PCI: Setting latency timer of device 02:00.0 to 64
eth1: Digital DS21143 Tulip rev 65 at 0x1800, 00:E0:98:70:1E:AF, IRQ 10.
eth1: EEPROM default media type Autosense.
eth1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1: MII transceiver #0 config 3000 status 7809 advertising 01e1.
call_usermodehelper[/sbin/hotplug]: no root fs



Linus Torvalds wrote:

> On Sat, 18 Nov 2000, David Ford wrote:
> > Linus Torvalds wrote:
> >
> > > Can you (you've probably done this before, but anyway) enable DEBUG in
> > > arch/i386/kernel/pci-i386.h? I wonder if the kernel for some strange
> > > reason doesn't find your router, even though "dump_pirq" obviously does..
> > > If there's something wrong with the checksumming for example..
> >
> > ..building now.
>
> Actually, try this patch first. It adds the PCI_DEVICE_ID_INTEL_82371MX
> router type, and also makes the PCI router search fall back more
> gracefully on the device it actually found if there is not an exact match
> on the "compatible router" entry...
>
> It should make Linux find and accept the chip you have. Knock wood.
>
> Linus
>
> --- v2.4.0-test10/linux/arch/i386/kernel/pci-irq.c Tue Oct 31 12:42:26 2000
> +++ linux/arch/i386/kernel/pci-irq.c Sat Nov 18 21:11:19 2000
> @@ -283,12 +297,19 @@
> { "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, pirq_piix_get, pirq_piix_set },
> { "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, pirq_piix_get, pirq_piix_set },
> { "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, pirq_piix_get, pirq_piix_set },
> + { "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, pirq_piix_get, pirq_piix_set },
> { "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_0, pirq_piix_get, pirq_piix_set },
> +
> { "ALI", PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, pirq_ali_get, pirq_ali_set },
> +
> { "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, pirq_via_get, pirq_via_set },
> { "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, pirq_via_get, pirq_via_set },
> { "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, pirq_via_get, pirq_via_set },
> +
> { "OPTI", PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C700, pirq_opti_get, pirq_opti_set },
> +
> + { "NatSemi", PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, pirq_cyrix_get, pirq_cyrix_set },
> +
> { "default", 0, 0, NULL, NULL }
> };
>
> @@ -298,7 +319,6 @@
> static void __init pirq_find_router(void)
> {
> struct irq_routing_table *rt = pirq_table;
> - u16 rvendor, rdevice;
> struct irq_router *r;
>
> #ifdef CONFIG_PCI_BIOS
> @@ -308,32 +328,31 @@
> return;
> }
> #endif
> - if (!(pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn))) {
> + /* fall back to default router if nothing else found */
> + pirq_router = pirq_routers + sizeof(pirq_routers) / sizeof(pirq_routers[0]) - 1;
> +
> + pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn);
> + if (!pirq_router_dev) {
> DBG("PCI: Interrupt router not found at %02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
> - /* fall back to default router */
> - pirq_router = pirq_routers + sizeof(pirq_routers) / sizeof(pirq_routers[0]) - 1;
> return;
> }
> - if (rt->rtr_vendor) {
> - rvendor = rt->rtr_vendor;
> - rdevice = rt->rtr_device;
> - } else {
> - /*
> - * Several BIOSes forget to set the router type. In such cases, we
> - * use chip vendor/device. This doesn't guarantee us semantics of
> - * PIRQ values, but was found to work in practice and it's still
> - * better than not trying.
> - */
> - DBG("PCI: Guessed interrupt router ID from %s\n", pirq_router_dev->slot_name);
> - rvendor = pirq_router_dev->vendor;
> - rdevice = pirq_router_dev->device;
> - }
> - for(r=pirq_routers; r->vendor; r++)
> - if (r->vendor == rvendor && r->device == rdevice)
> +
> + for(r=pirq_routers; r->vendor; r++) {
> + /* Exact match against router table entry? Use it! */
> + if (r->vendor == rt->rtr_vendor && r->device == rt->rtr_device) {
> + pirq_router = r;
> break;
> - pirq_router = r;
> - printk("PCI: Using IRQ router %s [%04x/%04x] at %s\n", r->name,
> - rvendor, rdevice, pirq_router_dev->slot_name);
> + }
> + /* Match against router device entry? Use it as a fallback */
> + if (r->vendor == pirq_router_dev->vendor && r->device == pirq_router_dev->device) {
> + pirq_router = r;
> + }
> + }
> + printk("PCI: Using IRQ router %s [%04x/%04x] at %s\n",
> + pirq_router->name,
> + pirq_router_dev->vendor,
> + pirq_router_dev->device,
> + pirq_router_dev->slot_name);
> }
>
> static struct irq_info *pirq_get_info(struct pci_dev *dev, int pin)
begin:vcard
n:Ford;David
x-mozilla-html:TRUE
adr:;;;;;;
version:2.1
email;internet:david@kalifornia.com
title:Blue Labs Developer
x-mozilla-cpt:;14688
fn:David Ford
end:vcard
\
 
 \ /
  Last update: 2005-03-22 12:47    [W:0.085 / U:3.536 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site