Messages in this thread |  | | Date | Sat, 7 Oct 2000 00:06:07 -0600 (MDT) | From | Dax Kelson <> | Subject | No SCSI burning problem (was: Bug in "ide-pci.c") |
| |
Jeff V. Merkey said once upon a time (Fri, 6 Oct 2000):
> > Andre, > > BTW, how did your testing of the speed=4 problem with ide-scsi turn > out. We are still seeing the speed=2 problem on 2.4.0-pre9. I cannot > get the drive to burn clean unless the speed setting is cranked down to > speed=2. > > Jeff
I just burned Red Hat 7.0 disk1 iso image at on a SCSI 4x burner without any problems. I have an IDE Plextor 12x burner at work, Monday I'll try a burn under 2.4.0-test9.
distro: Red Hat 7.0 kernel: 2.4.0-test9-pre8 Cdrecord 1.9 True SCSI Yamaha 4x burner
(scsi0) <Adaptec AHA-2940UW Pro Ultra SCSI host adapter> found at PCI 0/16/0 (scsi0:0:4:0) Synchronous at 8.0 Mbyte/sec, offset 15. Vendor: YAMAHA Model: CRW4416S Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0 Uniform CD-ROM driver Revision: 3.11 sr1: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
[root@localhost burn]# md5sum redhat-7.0-disc1.iso 626b7d18033e320c27c8cd58cc37a288 redhat-7.0-disc1.iso
[did a 4x burn]
[root@localhost dkelson]# md5sum /dev/scd1 626b7d18033e320c27c8cd58cc37a288 /dev/scd1
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |