lkml.org 
[lkml]   [2000]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: kernel 2.4.0-test9 nd bttv
On Sun, Oct 29, 2000 at 09:01:21PM -0500, vwbug wrote:
> it look like you didn't add the lines to .config the stupid bttv drivers
> that's why mine didnt work with bttv card i have read the .config under
> video for linux and found no refernce to bttv???

I'm not sure if this is what you mean, but you have to enable I2C
support and I2C bit-banging interfaces to be able to select BT848
support.


Erik
[happily using his BT848 card under 2.4.0-test10-pre3]

--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl
WWW: http://www-ict.its.tudelft.nl/~erik/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:45    [W:0.056 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site