Messages in this thread | | | Date | Sun, 15 Oct 2000 15:42:55 +0300 (EEST) | From | Panu Matilainen <> | Subject | Re: test10-pre1 problems on 4-way SuperServer8050 |
| |
On Thu, 12 Oct 2000, Keith Owens wrote:
> On Thu, 12 Oct 2000 12:56:09 +0100 (BST), > Tigran Aivazian <tigran@veritas.com> wrote: > >one correction -- it was "down and up the interface" that did the trick > >and not deleting the 64M mtrr entry. I.e. the eepro100 problem is better > >formulated as "when highmem is enabled one or both eepro100 interfaces > >sometimes do not work from boot but downing/upping the interface usually > >helps". When highmem is disabled, so far, _both_ eepro100 interfaces > >_always_ work on boot. > > That may only be coincidence. We have intermittent problems with > eepro100 under 2.4.0-testx, both ix86 and ia64. The symptoms are "card > reports no resources" messages; down and up the interface and it > usually works.
Might be related or not, but I've had nothing but problems with eepro100 until it's forced to use 100/FD. Symptoms include: either no network at all (driver complaining "card reports no resources") or impossibly slow and erratic network connections (like "ypcat foo" hanging for a second a few times in between)
- Panu -
> > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > Please read the FAQ at http://www.tux.org/lkml/ >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
| |