[lkml]   [2000]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectaf_packet: recvfrom causing high processor load in system
Hi, dear community,

The problem: under heavy network load
(2000 frame/sec and more, traffic produced with Fluke)
reading from the packet socket (SOCK_PACKET)
fully loads the processor every ~30 sec (PII-650).
The higher is the traffic level, the longer is the
"heavy system load" interval.
I have tried two NICs (3COM with 3c90x and Kingstone with tulip),
in promiscuous and normal mode - with the same effect.

Any help and/or information about this/such problem
is greatly appreciated.

Does it cause dropping of packets ?
Is there a way to workaround the processor load ?

Alexander Riesen

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:41    [W:0.034 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site