lkml.org 
[lkml]   [2000]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: unresolved symbols in ipx module
On Fri, 13 Oct 2000, John Williams wrote:

> This means to add ipx to the kernel, I have to rebuild the entire kernel
> and boot with it in order to satisfy the dependancies. I cannot just
> compile it as a module and add it because it has non-modular
dependancies.

I encountered this same problem with the Appletalk module a couple days
ago.

I compiled my kernel (2.2.17) with Appletalk disabled, then realized that
I needed it so I built it as a module. But it wouldn't load because it
required register_snap_client() and unregister_snap_client().

Rebuilding my kernel solved the problem, but it took a little digging
through Makefiles to figure out what was actually going on

Michael




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:45    [W:0.040 / U:3.492 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site