lkml.org 
[lkml]   [2000]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectStill problems with append eth1 in lilo
I thought I read on the TODO list that the problems regarding lilo configs
such as:

append="ether=5,0x300,,,eth1"

had been resolved. On my machine that is not true (dual ppro with
supermicro mobo). I have a 3c509 and a netgear fa 310tx. With the above
line in my lilo.conf the 3com should get eth1, but doesn't. Wasn't this
labeled as fixed?

cat /proc/interrupts
CPU0 CPU1
0: 31616114 31421286 IO-APIC-edge timer
1: 26156 26991 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 6825306 6844661 IO-APIC-edge serial
5: 30 40 IO-APIC-edge eth0
8: 0 0 IO-APIC-edge rtc
12: 393885 390415 IO-APIC-edge PS/2 Mouse
13: 0 0 XT-PIC fpu
14: 199820 205297 IO-APIC-edge ide0
16: 30430 30676 IO-APIC-level eth1
17: 148696 149030 IO-APIC-level Trident 4DWave PCI
19: 419370 421016 IO-APIC-level BusLogic BT-958
NMI: 63037335 63037335
LOC: 63035787 63035785
ERR: 0


cat /proc/pci

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 2).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
(rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
(rev 0).
Master Capable. Latency=32.
I/O at 0xffa0 [0xffaf].
Bus 0, device 17, function 0:
Ethernet controller: Lite-On Communications Inc LNE100TX (rev 32).
IRQ 16.
Master Capable. Latency=64.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xfebf9f00 [0xfebf9fff].
Bus 0, device 18, function 0:
Multimedia audio controller: Trident Microsystems 4DWave NX (rev 2).
IRQ 17.
Master Capable. Latency=64. Min Gnt=2.Max Lat=5.
I/O at 0xec00 [0xecff].
Non-prefetchable 32 bit memory at 0xfebfa000 [0xfebfafff].
Bus 0, device 19, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA G200 (rev 1).
IRQ 18.
Master Capable. Latency=64. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xfc000000 [0xfcffffff].
Non-prefetchable 32 bit memory at 0xfebfc000 [0xfebfffff].
Non-prefetchable 32 bit memory at 0xfe000000 [0xfe7fffff].
Bus 0, device 20, function 0:
SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10]
(rev 8).
IRQ 19.
Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0xeff4 [0xeff7].
Non-prefetchable 32 bit memory at 0xfebfb000 [0xfebfbfff].


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:39    [W:0.026 / U:5.504 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site