lkml.org 
[lkml]   [2000]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectUpdated 2.4 TODO List -- new addition WAS(test9 PCI resource collisions (fwd)

    I am attaching the debug output on bootup after defining DEBUG in pci.c
    and the i386 pci header file with test10-pre2
    Note: this is a Dell Lattitude docking station. The devices which are
    having resource problems are on the docking station. Works fine with 2.2
    kernels.

    Yes, this is on RH7 with kgcc. Please dont distract the subject header
    if you wanna attack that specifi issue. Just change the header and start a
    new thread.

    cheers,
    jamal



    ---------- Forwarded message ----------
    Date: Tue, 10 Oct 2000 19:56:46 -0400 (EDT)
    From: jamal <hadi@shell.cyberus.ca>
    To: linux-kernel@vger.kernel.org
    Cc: tytso@mit.edu, Martin Mares <mj@suse.cz>,
    Linus Torvalds <torvalds@transmeta.com>
    Subject: Updated 2.4 TODO List -- new addition WAS(test9 PCI resource
    collisions (fwd)


    Ted,

    Please add this to your list. Linux is unusable in these machines.
    I have cc'ed Martin and Linus because they play in that PCI area.

    cheers,
    jamal

    ---------- Forwarded message ----------
    Date: Thu, 5 Oct 2000 17:23:13 -0400 (EDT)
    From: jamal <hadi@shell.cyberus.ca>
    To: linux-kernel@vger.kernel.org
    Subject: test9 PCI resource collisions



    I have attached a few details of what appears to be a PCI resource alloc
    problem (IO ports from the look of it).
    Note: This is on a dell lattitude machine that never booted before
    with a docked setup.

    Enjoy!

    cheers,
    jamal
    Linux version 2.4.0-test10 (root@PCARD38C) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #4 Thu Oct 12 17:30:43 EDT 2000
    BIOS-provided physical RAM map:
    BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
    BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
    BIOS-e820: 000000000000c000 @ 00000000000c0000 (reserved)
    BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable)
    BIOS-e820: 0000000000010000 @ 000000000fff0000 (ACPI data)
    BIOS-e820: 0000000000060000 @ 00000000100a0000 (reserved)
    BIOS-e820: 0000000000200000 @ 00000000ffe00000 (reserved)
    On node 0 totalpages: 65520
    zone(0): 4096 pages.
    zone(1): 61424 pages.
    zone(2): 0 pages.
    Kernel command line:
    Initializing CPU#0
    Detected 498.482 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 992.87 BogoMIPS
    Memory: 255768k/262080k available (1094k kernel code, 5924k reserved, 70k data, 188k init, 0k highmem)
    Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
    CPU: Intel Pentium III (Coppermine) stepping 03
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
    PCI: BIOS32 Service Directory structure at 0xc00ffe80
    PCI: BIOS32 Service Directory entry at 0xffe90
    PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=02
    PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=2
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    Scanning bus 00
    Found 00:00 [8086/7190] 000600 00
    Found 00:08 [8086/7191] 000604 01
    Found 00:18 [104c/ac1c] 000607 02
    Found 00:19 [104c/ac1c] 000607 02
    Found 00:38 [8086/7110] 000680 00
    Found 00:39 [8086/7111] 000101 00
    PCI: IDE base address fixup for 00:07.1
    Found 00:3a [8086/7112] 000c03 00
    Found 00:3b [8086/7113] 000680 00
    Found 00:88 [8086/124b] 000604 01
    Fixups for bus 00
    PCI: Scanning for ghost devices on bus 0
    Scanning behind PCI bridge 00:01.0, config 010100, pass 0
    Scanning bus 01
    Found 01:00 [10c8/0006] 000300 00
    Found 01:01 [10c8/8006] 000401 00
    Fixups for bus 01
    PCI: Scanning for ghost devices on bus 1
    Bus scan for 01 returning with max=01
    Scanning behind PCI bridge 00:03.0, config 000000, pass 0
    Scanning behind PCI bridge 00:03.1, config 000000, pass 0
    Scanning behind PCI bridge 00:11.0, config 020200, pass 0
    Scanning bus 02
    Found 02:08 [102b/051b] 000300 00
    Found 02:28 [1095/0646] 000101 00
    PCI: IDE base address fixup for 02:05.0
    Found 02:38 [9004/6078] 000100 00
    Found 02:40 [10b7/9050] 000200 00
    Fixups for bus 02
    PCI: Scanning for ghost devices on bus 2
    Bus scan for 02 returning with max=02
    Scanning behind PCI bridge 00:01.0, config 010100, pass 1
    Scanning behind PCI bridge 00:03.0, config 000000, pass 1
    Scanning behind PCI bridge 00:03.1, config 000000, pass 1
    Scanning behind PCI bridge 00:11.0, config 020200, pass 1
    Bus scan for 00 returning with max=0a
    PCI: IRQ init
    PCI: Interrupt Routing Table found at 0xc00fbd80
    00:07 slot=00 0:00/0000 1:00/0000 2:00/0000 3:63/def8
    01:00 slot=00 0:60/def8 1:61/def8 2:00/0000 3:00/0000
    00:03 slot=00 0:63/def8 1:63/def8 2:00/0000 3:00/0000
    00:0d slot=00 0:62/def8 1:00/0000 2:00/0000 3:00/0000
    00:11 slot=00 0:62/def8 1:62/def8 2:62/def8 3:62/def8
    PCI: Bus 01 already known
    PCI: Using IRQ router default [8086/1234] at 00:07.0
    PCI: IRQ fixup
    PCI: Allocating resources
    PCI: Resource e0000000-e3ffffff (f=1208, d=0, p=0)
    PCI: Resource 00000860-0000086f (f=101, d=0, p=0)
    PCI: Resource 0000ece0-0000ecff (f=101, d=0, p=0)
    PCI: Resource e7800000-e7ffffff (f=1208, d=0, p=0)
    PCI: Resource fda00000-fdafffff (f=200, d=0, p=0)
    PCI: Resource e5000000-e5ffffff (f=1208, d=0, p=0)
    PCI: Resource fbffc000-fbffffff (f=200, d=0, p=0)
    PCI: Cannot allocate resource region 1 of device 02:01.0
    PCI: Resource fb000000-fb7fffff (f=200, d=0, p=0)
    PCI: Cannot allocate resource region 2 of device 02:01.0
    PCI: Resource 0000fcf8-0000fcff (f=109, d=0, p=0)
    PCI: Cannot allocate resource region 0 of device 02:05.0
    PCI: Resource 0000fcf0-0000fcf3 (f=101, d=0, p=0)
    PCI: Cannot allocate resource region 1 of device 02:05.0
    PCI: Resource 0000fce0-0000fce7 (f=101, d=0, p=0)
    PCI: Cannot allocate resource region 2 of device 02:05.0
    PCI: Resource 0000fcd8-0000fcdb (f=109, d=0, p=0)
    PCI: Cannot allocate resource region 3 of device 02:05.0
    PCI: Resource 0000fcc0-0000fccf (f=101, d=0, p=0)
    PCI: Cannot allocate resource region 4 of device 02:05.0
    PCI: Resource 0000f800-0000f8ff (f=101, d=0, p=0)
    PCI: Cannot allocate resource region 0 of device 02:07.0
    PCI: Resource fbffb000-fbffbfff (f=200, d=0, p=0)
    PCI: Cannot allocate resource region 1 of device 02:07.0
    PCI: Resource 0000fc80-0000fcbf (f=101, d=0, p=0)
    PCI: Cannot allocate resource region 0 of device 02:08.0
    PCI: Resource e8000000-e9ffffff (f=1208, d=1, p=1)
    PCI: Resource fdc00000-fdffffff (f=200, d=1, p=1)
    PCI: Resource fdb00000-fdbfffff (f=200, d=1, p=1)
    PCI: Failed to allocate resource 1 for Matrox Graphics, Inc. MGA 2164W [Millennium II]
    PCI: Failed to allocate resource 2 for Matrox Graphics, Inc. MGA 2164W [Millennium II]
    PCI: Failed to allocate resource 4 for CMD Technology Inc PCI0646
    PCI: Failed to allocate resource 0 for Adaptec AIC-7860
    PCI: Failed to allocate resource 1 for Adaptec AIC-7860
    PCI: Failed to allocate resource 0 for 3Com Corporation 3c905 100BaseTX [Boomerang]
    PCI: Sorting device list...
    Limiting direct PCI/PCI transfers.
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 16384)
    Initializing RT netlink socket
    Starting kswapd v1.8
    pty: 256 Unix98 ptys configured
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: enabling 8 loop devices
    Uniform Multi-Platform E-IDE driver Revision: 6.31
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PIIX4: IDE controller on PCI bus 00 dev 39
    PIIX4: chipset revision 1
    PIIX4 standard IDE storage device detected
    CMD646: IDE controller on PCI bus 02 dev 28
    CMD646: chipset revision 3
    CMD646: 100% native mode on irq 10
    CMD646: IO baseregs (BIOS) are reported as MEM, report to <andre@linux-ide.org>.
    CMD646: port 0x01f0 already claimed by ide0
    CMD646: IO baseregs (BIOS) are reported as MEM, report to <andre@linux-ide.org>.
    hda: FUJITSU MHK2120AT, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: 23579136 sectors (12073 MB) w/512KiB Cache, CHS=1467/255/63
    Partition check:
    hda: hda1 hda2 hda3
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS02 at 0x03e8 (irq = 4) is a 16550A
    3c59x.c:LK1.1.9 2 Sep 2000 Donald Becker and others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.38 $
    See Documentation/networking/vortex.txt
    eth0: 3Com PCI 3c905 Boomerang 100baseTx at 0x0, <3>PCI: Device 02:08.0 not available because of resource collisions
    3c59x: vortex_probe1 fails. Returns -5
    VFS: Mounted root (ext2 filesystem) readonly.
    Freeing unused kernel memory: 188k freed
    Adding Swap: 72284k swap-space (priority -1)
    \
     
     \ /
      Last update: 2005-03-22 12:41    [W:0.034 / U:0.124 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site