Messages in this thread | | | Date | Tue, 25 Jan 2000 19:46:47 -0500 (EST) | From | "Richard B. Johnson" <> | Subject | Re: Hangs after "Loading" but before "Uncompressing" |
| |
On Tue, 25 Jan 2000, Markley, Todd wrote: [SNIPPED...]
Just copy bzImage to a raw floppy, i.e., `cp /usr/src/linux/arch/i386/boot/bzImage /dev/fd0`
The root-device is probably be wrong so it will fail to mount root, but the floppy should boot, uncompress, etc. This will tell you where to look for other problems.
If the symptoms are the same, the kernel is probably broken in the compile. You need to make sure you have the most recent tools. Look in ../linux/Documentation/Changes.
If the system boots, but can't mount the root file-system, just `rdev` either the floppy itself or the bzImage file and do it again.
`rdev /tmp/bzImage /dev/whatever_your_root_is` `cp /tmp/bzImage /dev/fd0`
It should boot and, if your root-fs driver has been compiled in, mount the root. The machine is now working normally. It just didn't boot from the hard-disk. This would show that something about the lilo configuration file isn't right.
Cheers, Dick Johnson
Penguin : Linux version 2.3.39 on an i686 machine (800.63 BogoMips).
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |