Messages in this thread | | | Subject | Re: PCI in docking station | From | Jes Sorensen <> | Date | 20 Jan 2000 10:59:16 +0100 |
| |
>>>>> "Andrew" == Andrew McMillan <Andrew@catalyst.net.nz> writes:
Andrew> When I modprobe the TLAN driver I get: Jan 20 09:00:27 Andrew> localhost kernel: TLAN driver, v1.0, (C) 1997-8 Caldera, Inc. Andrew> Jan 20 09:00:27 localhost kernel: PCI: Enabling bus mastering Andrew> for device 01:60 Jan 20 09:00:27 localhost kernel: TLAN: eth1 Andrew> irq=11 io=e800, Compaq Netelligent 10/100 TX PCI UTP, Rev. 16
Andrew> But then when I ifconfig it the log says: Jan 20 09:02:42 Andrew> localhost kernel: TLAN: Cannot open eth1 because IRQ 11 is Andrew> already in use.
Looks pretty obvious from the lspci output, the bios likes to assign several devices to IRQ 11, including the video card, the IDE (CMD646) and the network interface. Have you tried fiddling with the bios and see if you can force it to assign interrupts differently?
Otherwise you just need to make sure that the device drivers are capable of running with shared interrupts - it looks like both the IDE code and the Tlan drivers do that in 2.2.10 at least though, you may need to poke the code and find out why it doesn't.
Jes
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |