lkml.org 
[lkml]   [1999]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: compiling kernel for PPC
Have you tried a kernel from CVS? Most PPC fixes go there first...

http://cvs.on.openprojects.net/
-Rob H.

On Mon, 16 Aug 1999, Sashka wrote:

> Date: Mon, 16 Aug 1999 11:39:25 -0400
> From: Sashka <nochkin@softhome.net>
> To: linux-kernel@vger.rutgers.edu
> Subject: compiling kernel for PPC
>
> Hello there.
>
> I was trying to compile kernel to boot up my PowerPC
> system (i think it's a PREP platform, CPU 601, RS/6000 by IBM,
> 64Mb RAM)
> i configured kernel with minimum options just to see
> if its wiorking. i compile it with serial console built-in.
> when i'm booting up then i see:
> loaded at: 0039ABE0 003B19F0
> relocated to: 00800000 00816E10
> board data at: 001033F0 00109DFC
> relocated to: 00810304 00816D10
> zimage at: 003A5BE0 003FD69D
> relocated to: 00817000 0086EABD
> avail ram: 00400000 00800000
>
> Linux/PPC load: console=ttyS0,9600
> Uncompressing Linux...done.
> Now booting the kernel
>
> and it freeze at this point.
> i saw that this is an old problem with some systems,
> but i did not find any working way to fix it.
> kernel 2.2.11, but i tried 2.2.10 and 2.2.9.
> looks like kernel confused about my computer
> configuration and memory stuff.
> ah, one more thing. i compiled it with cross-compiler
> running on x86.
>
> thanks in advance.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:1.125 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site