lkml.org 
[lkml]   [1999]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectcompiling kernel for PPC
Hello there.

I was trying to compile kernel to boot up my PowerPC
system (i think it's a PREP platform, CPU 601, RS/6000 by IBM,
64Mb RAM)
i configured kernel with minimum options just to see
if its wiorking. i compile it with serial console built-in.
when i'm booting up then i see:
loaded at: 0039ABE0 003B19F0
relocated to: 00800000 00816E10
board data at: 001033F0 00109DFC
relocated to: 00810304 00816D10
zimage at: 003A5BE0 003FD69D
relocated to: 00817000 0086EABD
avail ram: 00400000 00800000

Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel

and it freeze at this point.
i saw that this is an old problem with some systems,
but i did not find any working way to fix it.
kernel 2.2.11, but i tried 2.2.10 and 2.2.9.
looks like kernel confused about my computer
configuration and memory stuff.
ah, one more thing. i compiled it with cross-compiler
running on x86.

thanks in advance.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.028 / U:1.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site