Messages in this thread | | | Date | Thu, 12 Aug 1999 00:44:37 +0200 | From | Marcel Lanz <> | Subject | Re: bttv & 2.2.11 => can't switch channels |
| |
Alan Cox wrote: > > > Since I use 2.2.11 I can't switch between channels on my Haupauge > > TV-Card. > > I have only one channel. > > > > Any ideas? > > What errors are coming back when you attempt to tune the card. Do you have > the tuner loaded, what does it report at start up Ugh. no errors.
At bootup my kernel said:
Aug 12 00:34:36 defiant kernel: Linux video capture interface: v1.00 Aug 12 00:34:36 defiant kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 88, irq: 15, memory: 0xe2000000. Aug 12 00:34:36 defiant kernel: bttv: 1 Bt8xx card(s) found. Aug 12 00:34:36 defiant kernel: bttv0: Hauppauge eeprom: tuner=Philips FI1216 MK2 (5) Aug 12 00:34:36 defiant kernel: bttv0: fader chip: TEA6300 Aug 12 00:34:36 defiant kernel: bttv0: model: BT878(Hauppauge new) ... Aug 12 00:34:57 defiant kernel: bttv0: PLL: 28636363 => 35468950 ... ok
I use xawtv-2.38 and bttv-support is compiled into the kernel. If I tune the card. No errors occured. The channel-identifier from xawtv changes, but the picture is the same.
marcel
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |