lkml.org 
[lkml]   [1999]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: NCR810 problems on 2.2.10-ac10

    Hello Mike , This is a faq, Please don't use the 53c7,8xx.c
    driver . Using the ncr53c8xx.c or sym53c8xx.c is the way to go .
    Hth, JimL

    On Sat, 17 Jul 1999, Mike Frisch wrote:
    > When attempting to boot 2.2.10-ac10 on an AMD K6/233 w/FIC PA-2007
    > motherboard and a generic NCR810 based card, I get the following messages
    > during boot:
    > CONFIG_SCSI_NCR53C7xx=m
    +-----------------------------------------------------------------+
    | James W. Laferriere | System Techniques | Give me VMS |
    | Network Engineer | 25416 22nd So | Give me Linux |
    | babydr@baby-dragons.com | DesMoines WA 98198 | only on AXP |
    +-----------------------------------------------------------------+


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:53    [W:0.017 / U:30.580 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site