lkml.org 
[lkml]   [1999]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: OOPs: 2.2.10 + pcmcia-cs-3.0.13 (ThinkPad390E + 3Com Megahertz)
In article <14217.2388.774624.682487@blomman18.ce.chalmers.se>,
Otel Florian-Daniel <otel@ce.chalmers.se> wrote:
> Hello,

> I just tried to splash RH6.0 on a ThinkPad390E with a 3Com Megahertz
> combo card. The stock RH pcmcia.img OOPsed (same as below) upon
> installation couldn't get the card running. I still installed the
> system, then upgraded to the latest (kernel to 2.2.10 and pcmcia-cs
> 3.0.13). Even after upgrading, when booting or when issuing a
> 'cardctl ident' i get OOPsed. Booting __without__ the card inserted
> is O.K.: The host controler is identified and the cardmgr is started:

[logs and dumps snipped]

I got _exactly_ the same thing when I used pcmcia-cs 3.0.13 with my
2.2.10-ac9 kernel. With the original 2.2.10 it is ok though. BTW, I'm
using the Debian 2.1 (slink) distribution. With SuSE 6.0 and 2.2.10
kernel (which I used 'till last week) pcmcia-cs 3.0.13 worked fine, but
then I had no 2.2.10-ac9 running.

Not much help for you, just the fact that you are not alone. There _is_
something rotten!

Greetings,

Stefan.

--
Stefan Bellon <bellonsn@trick.informatik.uni-stuttgart.de>
Acorn RiscPC * StrongARM 202 MHz * 66 MB RAM

All humans are created equal, all computers are not - Acorn RiscPC.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.053 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site