lkml.org 
[lkml]   [1999]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PCI devices scan code error & fix
Hello,

> Hi All, I've bought new motherboard based on VIA MVP3 chipset
> with ACPI interface & GL518 sensor chip, but I could not start monitoring
> software due to absend apropriate device in list of PCI devices. If I enable
> disabled for irq line saving USB it's apear in PCI list together with ACPI
> interface. I looked in kernel code & found that if one function on mult-function
> PCI device disabled all further function on this device is not checked. In my
> case disabling USB (bus 0, dev 7, func 2) lead to lost ACPI interface
> (bus 0, dev 7, func 3). After removing this line from pci.c file all works fine:

Hmmm, another broken PCI device :-((

Can you send me 'lspci -vvx -MH1' output, please?

Have a nice fortnight
--
Martin `MJ' Mares <mj@ucw.cz> http://atrey.karlin.mff.cuni.cz/~mj/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
"For every complex problem, there's a solution that is simple, neat and wrong."

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.030 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site