Messages in this thread | | | Date | Wed, 30 Jun 1999 22:15:33 +0200 (CEST) | From | Bruno Semrau <> | Subject | problem with acard SCSI Hostadapter |
| |
Hello, i have a Acard SCSI-3 (aec6710u) host adapter without a bios. Kernel 2.2.x or 2.3.x doesn´t detect my MATSHITA CD-R. With Kernel 2.0.37pre, 2.0.36 or wWIN95 i have no Problems. SCSI Support, SCSI CD-ROM support,SCSI generic support is compiled into the kernel.
boot.msg ------------------ ---------------------- <4>aec671x_detect: <4> ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:6400, IRQ:10. <4> ID: 6 MATSHITACD-R CW-7502 3.02 <4> ID: 7 Host Adapter <4>scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0 <4>scsi : 1 host. <4>scsi0 channel 0 : resetting for second half of retries. <4>SCSI bus is being reset for host 0 channel 0. <4>scsi : detected total. ^^^^^^^^^^^^ ----------------------------------------
#echo "scsi add-single-device 0 0 6 0" >/proc/scsi/scsi doesn´t work
# cat /proc/scsi/scsi Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: h Model: \ = Rev: Type: Sequential-Access ANSI SCSI revision: 01
thx Bruno
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |