lkml.org 
[lkml]   [1999]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: strange problem in X...commonalities
On Mon, 28 Jun 1999, Gerold Jury wrote:

>I had frequent lockups on my SMP machine that where gone
>
>when i removed "hdparm -c 1 -u 1" from my startup scripts.
>
>For me it seemed to be related to networking or X.
>
>kernel: PIIX3: IDE controller on PCI bus 00 dev 39
>kernel: PIIX3: not 100ative mode: will probe irqs later
>kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
>kernel: hda: IBM-DTTA-351010, ATA DISK drive
>kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>kernel: hda: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=1232/255/63, (U)DMA

My stuff:

PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 71000 A, ATA DISK drive
hdb: HP CD-Writer+ 7100, ATAPI CDROM drive
hdc: IBM-DTTA-371010, ATA DISK drive
hdd: LEOPTICS INC. 32X CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Maxtor 71000 A, 958MB w/64kB Cache, CHS=973/32/63, DMA
hdc: IBM-DTTA-371010, 9641MB w/465kB Cache, CHS=19590/16/63, (U)DMA

I've been running /sbin/hdparm -c1 -d1 -u1 -X34 -W1 -k1 -K1 /dev/hd[ac] on
all hard drives since about two years ago, (though I only had the Maxtor
drive for some of that time). I haven't had a single crash caused by
something I couldn't attribute to something (i.e., the 'stuck on TLB IPI
wait' problem fixed in 2.2.10)

>IDE Controller

>00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]

00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]

>Board : GIGABYTE-i.dont.know 2x200 Pentium MMX

Tyan Tomcat IV 2x Pentium 233 MMX

>kernel 2.2.10-ac4

Currently 2.2.10, though none have shown problem here.

My video card is a generic S3 ViRGE using the S3V X server, you?

00:11.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)

-George Greer


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.244 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site