Messages in this thread | | | Subject | Re: DMA timeout hang with 2.2.9+ | From | Shenghuo ZHU <> | Date | 24 Jun 1999 23:49:55 -0400 |
| |
>>>>> "MG" == Matthew Gabeler-Lee <msg2@po.cwru.edu> writes:
MG> A person in my local LUG suggested that I send this bug to the list. MG> Since 2.2.9[1], I have had problems with linux dying with the error MG> "Timeout on hda waiting for DMA". By dying I mean that nothing but the
MG> Nitty gritty of the hardware: MG> Motherboard is a SuperMicro P6DBE with two PII/300 chips. I use both MG> the on-board piix4 IDE controller, and an offboard Promise Ultra33 MG> controller. While the crashes usually happen on hda, the only linux MG> files on hda are the ftp and http documents. The IDE devices are as MG> follows: MG> hda: Maxtor 8.4 GB UltraATA/DMA drive (purchased August 1998) MG> hdb: Panasonic 24x CD-ROM (same purchase time) MG> hdc: Seagate Travan tape drive (STT-8000A, I believe) MG> hdd: Sony CDU-928E CD-R MG> hde: MAxtor 8.4 GB UltraATA/DMA drive (purchased January 1999)
This also happens to me. Maxtor hard disk!
,-------- | Linux version 2.2.10 | AMD-K6tm w/ multimedia extensions stepping 02 | PIIX4: IDE controller on PCI bus 00 dev 09 | | hdc: timeout waiting for DMA | hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } | hdc: DMA disabled | ide1: reset: success | | hda: QUANTUM FIREBALL ST6.4A, 6149MB w/81kB Cache, CHS=784/255/63, UDMA | hdb: QUANTUM FIREBALL ST3.2A, 3079MB w/81kB Cache, CHS=782/128/63, UDMA | hdc: Maxtor 90340D2, ATA DISK drive `--------
-- Shenghuo
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |