This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Wed May 22 06:49:38 2024 Received: from entropy.muc.muohio.edu (IDENT:root@entropy.muc.muohio.edu [134.53.213.10]) by herbie.ucs.indiana.edu (8.9.3/8.9.3) with ESMTP id LAA15521 for ; Sat, 12 Jun 1999 11:19:09 -0500 (EST) Received: from vger.rutgers.edu (vger.rutgers.edu [128.6.190.2]) by entropy.muc.muohio.edu (8.8.7/8.8.7) with ESMTP id MAA17442; Sat, 12 Jun 1999 12:18:06 -0400 Received: by vger.rutgers.edu via listexpand id ; Sat, 12 Jun 1999 12:16:02 -0400 Received: by vger.rutgers.edu id ; Sat, 12 Jun 1999 12:15:47 -0400 Received: from finch-post-10.mail.demon.net ([194.217.242.38]:3168 "EHLO finch-post-10.mail.demon.net") by vger.rutgers.edu with ESMTP id ; Sat, 12 Jun 1999 12:14:17 -0400 Received: from scot-mur.demon.co.uk ([194.222.63.202] helo=mailserver.scot-mur.demon.co.uk) by finch-post-10.mail.demon.net with esmtp (Exim 2.12 #1) id 10sqPy-000Jjo-0A for linux-kernel@vger.rutgers.edu; Sat, 12 Jun 1999 16:14:13 +0000 Received: from linux.scot-mur.demon.co.uk [192.168.1.1] (mail) by mailserver.scot-mur.demon.co.uk with esmtp (Exim 2.11 #1 (Debian)) id 10sqJt-0000Kd-00; Sat, 12 Jun 1999 17:07:45 +0100 Received: from robbie by linux.scot-mur.demon.co.uk with local (Exim 2.11 #1 (Debian)) id 10spY5-0003mz-00; Sat, 12 Jun 1999 16:18:21 +0100 Date: Sat, 12 Jun 1999 16:18:21 +0100 To: linux-kernel@vger.rutgers.edu Subject: UM8886bf Message-Id: <19990612161821.J412@scot-mur.demon.co.uk> Mail-Followup-To: linux-kernel@vger.rutgers.edu Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="e5bfZ/T2xnjpUIbw" X-Mailer: Mutt 0.95.4i From: Sender: owner-linux-kernel@vger.rutgers.edu Precedence: bulk X-Loop: majordomo@vger.rutgers.edu X-Orcpt: rfc822;linux-kernel-outgoing-dig --e5bfZ/T2xnjpUIbw Content-Type: text/plain; charset=us-ascii Hi I am having problems with an UM8886bf ide chipset. It is very slow. I have included the output from dmesg below. Is there anything I can do to make it faster? hdparm -d 1 doesn't work. Regards -- Rob Murray --e5bfZ/T2xnjpUIbw Content-Type: message/rfc822 Received: from localhost [127.0.0.1] (robbie) by linux.scot-mur.demon.co.uk with esmtp (Exim 2.11 #1 (Debian)) id 10sn7E-0003hs-00; Sat, 12 Jun 1999 13:42:28 +0100 Received: from mailserver.scot-mur.demon.co.uk by localhost with POP3 (fetchmail-5.0.1) for robbie@localhost (single-drop); Sat, 12 Jun 1999 13:42:28 +0100 (BST) Received: from root by mailserver.scot-mur.demon.co.uk with local (Exim 2.11 #1 (Debian)) id 10snsc-00003K-00; Sat, 12 Jun 1999 14:31:26 +0100 To: robbie@scot-mur.demon.co.uk Message-Id: From: root Date: Sat, 12 Jun 1999 14:31:26 +0100 X-UIDL: 3712335ed80e61c2493a8e41430aed9c Linux version 2.2.9 (root@linux) (gcc version egcs-2.91.66 Debian GNU/Linux (egcs-1.1.2 release)) #1 Sat Jun 12 07:31:08 BST 1999 Console: colour VGA+ 80x25 Calibrating delay loop... 49.97 BogoMIPS Memory: 63436k/65536k available (732k kernel code, 408k reserved, 920k data, 40k init) Checking if this processor honours the WP bit even in supervisor mode... Ok. CPU: 486 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xf6f41 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: 00:91 [1060/673a]: Working around UM8886BF bugs Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP Starting kswapd v 1.5 Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 UM8886A: IDE controller on PCI bus 00 dev 90 UM8886A: not 100% native mode: will probe irqs later UM8886BF: IDE controller on PCI bus 00 dev 91 UM8886BF: not 100% native mode: will probe irqs later UM8886BF: port 0x01f0 already claimed by ide0 UM8886BF: port 0x0170 already claimed by ide1 UM8886BF: neither IDE port enabled (BIOS) hda: ST31722A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ST31722A, 1625MB w/128kB Cache, CHS=3303/16/63 Floppy drive(s): fd0 is 1.44M FDC 0 is an 8272A IP-Config: No network devices available. Partition check: hda: hda1 hda2 hda3 hda4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 40k freed Adding Swap: 33260k swap-space (priority -1) smc-ultra.c: Presently autoprobing (not recommended) for a single card. smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov) eth0: SMC Ultra at 0x300, 00 00 C0 48 CC A1, IRQ 10 memory 0xcc000-0xcffff. CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. registered device ppp0 --e5bfZ/T2xnjpUIbw-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/