lkml.org 
[lkml]   [1999]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.2.8, 2.2.9 and CD burning
It worked here.  CDRW is a Phillips CDD3610, kernel is 2.2.9.  I'm using
the cdrecord packages (v 1.8a20) made by Ryan Weaver. Any ideas on why
mine is working and your setup isn't?

On Sun, 16 May 1999, Bob_Tracy wrote:

> On Fri, 14 May 1999, Trever Adams wrote:
> > I have no burned 3 coasters because of odd errors
> > out of cdrecord and ruined a cdrw (can't blank it).
> >
> > I get a scsi reset shortly after the "retryable" error message. To be
> > honest, I don't know if it worked before 2.2.8.
>
> Same symptoms observed here. The problem occurs within the first 3-4MB
> (at least for the two coasters I made). Works fine with same hardware
> setup under 2.2.7. I don't know what has changed, but I'll be hanging
> onto a back-rev of the kernel for a while just for CD burning. The setup
> here is a Yamaha CRW-4416S in an external enclosure attached to a BT-948.
> The system's disks are also SCSI, and attached the internal interface of
> the same BT-948 controller.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:51    [W:0.061 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site