lkml.org 
[lkml]   [1999]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectmultiple SCSI cards and dual boot w/ NT
I am trying to use RH5.2 with an Adaptec 2940UW with one dirve attached
and an Adaptec 2944WD with 2 drives attached. My bios loads the UW
controller first which has NT installed on the UW drive but when I try
to install Linux it seems to be looking at the WD controller first. In
disk druid the 2 drives on the WD controller are assigned sda & sdb and
the UW drive is sdc. I ran across something during the install that said
to use LILO it must be installed on either sda or sdb. That being said,
if I finish the install and reboot, I get the NT loader and never see
LILO since LILO won't install itself on to the same physical disk as NT.
My question then, is how can I get this to work without moving the WD
controller to another machine?

Thanks,
Dave


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:51    [W:2.182 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site