lkml.org 
[lkml]   [1999]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: kernel 2.2.3 and pppd

On Sun, 21 Mar 1999, Karl F. Larsen wrote:

> The problem is getting pppd to work with kernel 2.2.3 on a
> Red Hat version 5.2 computer. The pppd version is the latest done
> March 11 1999. All works fine under the 2.0.36 kernel.
<snip>
> Mar 20 21:16:37 cannac pppd[636]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa9f02865> <pcomp> <accomp>]
> Mar 20 21:17:04 cannac last message repeated 9 times
> Mar 20 21:17:07 cannac pppd[636]: LCP: timeout sending Config-Requests
> Mar 20 21:17:07 cannac pppd[636]: Connection terminated.
> Mar 20 21:17:07 cannac pppd[636]: Receive serial link is not 8-bit clean:
> Mar 20 21:17:07 cannac pppd[636]: Problem: all had bit 7 set to 0
> Mar 20 21:17:08 cannac pppd[636]: Exit.
>
> Any help would be most welcome. The new kernel has beat me!

I had a problem very similar to this when I upgraded my server to 2.2.1.
It turned out that the newer kernel was detecting my 16550A UART's as
16750's. Commenting out the 16750 detection code fixed it.

Your problem is probably something different as I suspect the incorrect
detection is rare, but check the output of dmesg just in case.

Hope that helps,
Ray


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:2.043 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site