lkml.org 
[lkml]   [1999]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Poor PPP performance in 2.2.x
Nope here's my printout from setserial:

/dev/modem, UART: 16550A, Port: 0x03f8, IRQ: 4, Flags: spd_vhi

Thats all perfectly correct, manually setting them makes no difference.

Later,
Tom


Quoting John Alvord <jalvo@cloud9.net>:

> Maybe you are using autodetection in setserial. That tends to work
> poorly sometimes. If it fails to detect the type of UART correctly,
> you would see those symptoms. Try setting the UART type, IRQ, port
> address, etc and see if that changes the symptoms.
>
> john alvord
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.030 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site