lkml.org 
[lkml]   [1999]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.3.31: eepro100 transmit timeouts
With 2.3.31 I get this:

eepro100.c:v1.09j 7/27/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
The PCI BIOS has not enabled this device! Updating PCI command 0103->0107.
eth0: OEM i82557/i82558 10/100 Ethernet at 0xc8017000, 00:06:29:CE:1E:F9, IRQ 11.
Board assembly 000001-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
[...]
eth0: Transmit timed out: status 0050 0000 at 33884/33896 command 000c0000.
[more debugging snipped]

It happened about ten minutes after booting, and then again about three
minutes later. I wouldn't have noticed if I hadn't look at the message
ring buffer..

Tim.
*/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.102 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site