Messages in this thread | | | From | "Keith Bottner" <> | Subject | RE: Problem running 2.2.13 | Date | Thu, 30 Dec 1999 13:55:16 -0600 |
| |
/dev/sda10 is the correct mount that I am attempting to use and that works with my other kernels. I built the Adaptec SCSI controllers into the kernel to avoid this problem. I will recheck my configuration and try again and let you know how it goes. BTW as an aside how did you interpret the error message I have you to a reference to /dev/sda10?
Thanks,
Keith Bottner kbottner@istation.com
-----Original Message----- From: owner-linux-kernel@vger.rutgers.edu [mailto:owner-linux-kernel@vger.rutgers.edu]On Behalf Of Matthew Wilcox Sent: Thursday, December 30, 1999 1:25 PM To: Keith Bottner Cc: Linux-Kernel Subject: Re: Problem running 2.2.13
On Thu, Dec 30, 1999 at 11:47:52AM -0600, Keith Bottner wrote: > "Kernel panic : VFS : Unable to mount root fs on 08:0a"
The kernel is attempting to mount /dev/sda10. Is this the right hard disc and partition for you?
If that's correct, you probably didn't configure the appropriate scsi driver into your kernel. If it isn't, you need to tell it which hard disc partition is your root device in the lilo.conf.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |