lkml.org 
[lkml]   [1999]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectOops 2.3.31 UP gcc2.95.2 NEC Versa LX 3c575
I said something earlier today about a problem with my nec laptop (with
ricoh tl5c478 cardbus controller) and a 3com 10/100 cardbus adapter (3c575)

I was able to get an OOPS and decode it. It seems that this only happens
when using lftp and writing to the hdd. The transfer was going at
~6.1mbyte/sec before it crashed.

This oops happens when ejecting the card after getting this error:
eth0: Host error, FIFO diagnostic register 0000.
This message repeats 21 times
eth0: Too much work in interrupt, status 8003. Temporarily disabling
functions (7ffc).

Could this be a problem with the cardbus adapter? I have no other cardbus
machines to test this card on.

--
Lab tests show that use of micro$oft causes cancer in lab animals
ksymoops 0.7c on i686 2.3.31-gcc_2.95.2. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.3.31-gcc_2.95.2/ (default)
-m /boot/System.map-2.3.31-gcc_2.95.2 (specified)

Unable to handle kernel NULL pointer dereference at virtual address 00000074
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c406119a>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 00001000 ebx: 0000255f ecx: 00000100 edx: 00000000
esi: c3e0e000 edi: 0000255f ebp: 00000100 esp: c01d5f44
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c01d5000)
Stack: 0000000b c02496c0 020ee601 00000013 0000ffff 00000200 c3e0e000 c317a200
c010cd08 0000000b c317a200 c01d5fac 00000160 0000000b c01f7a60 c01d5fa4
c010ce92 0000000b c01d5fac c1324640 00109ce9 00000408 c0105000 c1324640
Call Trace: [<c010cd08>] [<c010ce92>] [<c0105000>] [<c010bfa8>] [<c4002030>] [<c0105000>] [<c0100018>]
[<c0190759>] [<c0109d20>] [<c0100175>]
Code: ff 4a 74 0f 94 c0 84 c0 74 09 52 e8 12 05 0f fc 83 c4 04 8b

>>EIP; c406119a <[3c575_cb]vortex_up+57a/69c> <=====
Trace; c010cd08 <handle_IRQ_event+34/60>
Trace; c010ce92 <do_IRQ+72/b4>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c010bfa8 <ret_from_intr+0/20>
Trace; c4002030 <_end+3dafbe8/3dc4c08>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0100018 <startup_32+18/11d>
Trace; c0190759 <acpi_idle_handler+7d/1c0>
Trace; c0109d20 <cpu_idle+50/54>
Trace; c0100175 <L6+0/2>
Code; c406119a <[3c575_cb]vortex_up+57a/69c>
00000000 <_EIP>:
Code; c406119a <[3c575_cb]vortex_up+57a/69c> <=====
0: ff 4a 74 decl 0x74(%edx) <=====
Code; c406119d <[3c575_cb]vortex_up+57d/69c>
3: 0f 94 c0 sete %al
Code; c40611a0 <[3c575_cb]vortex_up+580/69c>
6: 84 c0 test %al,%al
Code; c40611a2 <[3c575_cb]vortex_up+582/69c>
8: 74 09 je 13 <_EIP+0x13> c40611ad <[3c575_cb]vortex_up+58d/69c>
Code; c40611a4 <[3c575_cb]vortex_up+584/69c>
a: 52 push %edx
Code; c40611a5 <[3c575_cb]vortex_up+585/69c>
b: e8 12 05 0f fc call fc0f0522 <_EIP+0xfc0f0522> c01516bc <__kfree_skb+0/e8>
Code; c40611aa <[3c575_cb]vortex_up+58a/69c>
10: 83 c4 04 add $0x4,%esp
Code; c40611ad <[3c575_cb]vortex_up+58d/69c>
13: 8b 00 mov (%eax),%eax

Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task!
In swapper task - not syncing
\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.044 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site