lkml.org 
[lkml]   [1999]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: 2.3.26: usb-mouse/uhci
On Sun, Nov 07, 1999 at 01:40:14PM +0100, Joerg Stroettchen wrote:
> hello,
>
> switching from 2.3.25 to 2.3.26 introduced a somewhat strange behaviour
> of my usb-mouse: response to a mouse clicks requires a small movement of
> the mouse.
>
> /var log/messages tells me 1380 times per minute:
>
> kernel: Set toggle from c7d0080 rval 4* for status=25000003 to 1,exp=3,
> act=4

I'm running linux-2.3.26 here.
I have a M$ Intellimouse USB mouse.
It works great, apart from the wheel (but thats to be expected).
I don't see the problems you describe.

I use gpm.
My X server is connected to /dev/gpmdata.
Here is the relevant part from XF86Config:

Section "Pointer"
Device "/dev/gpmdata"
Protocol "MouseSystems"

I run gpm as follows:

gpm -3 -m /dev/usb/mouse0 -t imps2 -R msc

Regards,
Toon.
--
Toon van der Pas Email: toon@vdpas.hobby.nl
Zomervlinderberm 24 Phone: +31 (30) 635 3162 -o)
3994 WP Houten Fax: +31 (30) 634 1662 /\\
The Netherlands _\_v

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:54    [W:0.267 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site