lkml.org 
[lkml]   [1999]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRE: 64M vs 128M
    Date
    Work is being done on a similar problem, but I'm not sure if it is YOUR
    problem. Have you upgraded your motherboard recently? Is ACPI turned on?
    There is a known issue with ACPI biosen and 2.2.x. Or did you just upgrade
    your kernel & see this problem.

    Nathan


    -----Original Message-----
    From: `Jag [mailto:agrajag@linuxpower.org]
    Sent: Thursday, October 14, 1999 10:12 AM
    To: linux-kernel@vger.rutgers.edu
    Subject: 64M vs 128M


    I have a PII400 UP machine with a single 128M DIMM. My kernel is only
    recognizing 64M of that 128M. I had this problem last year when it was a
    known problem, but it worked fine once that 64M RAM bug was supposedly
    fixed. However, in 2.2.12 and 2.2.13pre15 I've noticed that it's gone
    back to using only 64M of RAM. The append="mem=128M" line in lilo.conf
    will fix it, but I think this is a bigger problem that needs to be
    addressed.
    If you need more setup about my setup, just let me know.

    `Jag

    PS I'm not on this list, so please cc me in your responses.
    --

    Who wills,
    Can.
    Who tries,
    Does.
    Who loves,
    Lives.


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:54    [W:0.040 / U:0.380 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site