lkml.org 
[lkml]   [1999]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.2.0-pre4 sound problems
> > init-2.01# insmod sb irq=7 io=0x220 dma=1 dma16=5
> > Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> > SB 4.13 detected OK (220)
> > Unable to handle kernel NULL pointer dereference at virtual address 000000a0
> > current->tss.cr3 = 09dd0000, %cr3 = 09dd0000
>
> Ok it went through a null pointer for some reason. I'll work back from that
> trace

Thanx... This is sorta off subject (module crashing that is).

On my system (since this crashes this way), I have /dev/dsp (the sb16) as
/dev/dsp2, and I have dsp1 and dsp2 (the pci64) as dsp and dsp1.

Well, when I record from /dev/dsp2 (maj 14 min 3), It always says device or
resource busy.

Any clues?

(Way off subject. I have a program/module called linspy. It allows me to
attach to another terminal and control it. Snooping if you will. I use
this at work when I dial into it. For instance, I don't want to kill my
shell, which kills the xterm, just to unmount a drive. I knew this wouldn't
work in 2.1.<something> and doesn't in 2.2.0. Is there anything similar to
this that will work under 2.2?)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.215 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site