lkml.org 
[lkml]   [1999]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectioctl obsolete error
    Upon building the 2.2pre kernels, I get the error message

    TIOCSER?WILD ioctl obsolete, ignored

    twice during the boot process.

    Attached find my 'dmesg' output as well as my .config. I can provide more
    information upon request.


    Alec Smith


    #
    # Automatically generated make config: don't edit
    #

    #
    # Code maturity level options
    #
    # CONFIG_EXPERIMENTAL is not set

    #
    # Processor type and features
    #
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    CONFIG_M686=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_TSC=y
    CONFIG_X86_GOOD_APIC=y
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_SMP is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_KMOD is not set

    #
    # General setup
    #
    CONFIG_NET=y
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_QUIRKS=y
    CONFIG_PCI_OLD_PROC=y
    # CONFIG_MCA is not set
    CONFIG_SYSVIPC=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_MISC=y
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    # CONFIG_PARPORT_OTHER is not set
    # CONFIG_APM is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_PARPORT is not set

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_IDE_CHIPSETS is not set

    #
    # Additional Block Devices
    #
    CONFIG_BLK_DEV_LOOP=m
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_MD is not set
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_BLK_DEV_XD is not set
    CONFIG_PARIDE_PARPORT=y
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # Networking options
    #
    CONFIG_PACKET=y
    # CONFIG_NETLINK is not set
    # CONFIG_FIREWALL is not set
    # CONFIG_NET_ALIAS is not set
    # CONFIG_FILTER is not set
    CONFIG_UNIX=y
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_IP_ROUTER is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_ALIAS is not set
    # CONFIG_SYN_COOKIES is not set

    #
    # (it is safe to leave these untouched)
    #
    # CONFIG_INET_RARP is not set
    CONFIG_IP_NOSR=y
    CONFIG_SKB_LARGE=y

    #
    #
    #
    CONFIG_IPX=m
    # CONFIG_IPX_INTERN is not set
    # CONFIG_ATALK is not set

    #
    # SCSI support
    #
    CONFIG_SCSI=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_BLK_DEV_SR is not set
    CONFIG_CHR_DEV_SG=y

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AHA1740 is not set
    # CONFIG_SCSI_AIC7XXX is not set
    CONFIG_SCSI_ADVANSYS=y
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_AM53C974 is not set
    # CONFIG_SCSI_MEGARAID is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_DMA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_INITIO is not set
    CONFIG_SCSI_PPA=y
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_IZIP_EPP16 is not set
    # CONFIG_SCSI_IZIP_SLOW_CTR is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_NCR53C7xx is not set
    # CONFIG_SCSI_NCR53C8XX is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PCI2000 is not set
    # CONFIG_SCSI_PCI2220I is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_SEAGATE is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    # CONFIG_EQUALIZER is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_NET_VENDOR_3COM=y
    # CONFIG_EL1 is not set
    # CONFIG_EL2 is not set
    # CONFIG_ELPLUS is not set
    # CONFIG_EL3 is not set
    # CONFIG_3C515 is not set
    CONFIG_VORTEX=y
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set
    # CONFIG_NET_ISA is not set
    # CONFIG_NET_EISA is not set
    # CONFIG_NET_POCKET is not set
    # CONFIG_FDDI is not set
    # CONFIG_DLCI is not set
    # CONFIG_PLIP is not set
    CONFIG_PPP=m

    #
    # CCP compressors for PPP are only built as modules.
    #
    # CONFIG_SLIP is not set
    # CONFIG_NET_RADIO is not set
    # CONFIG_TR is not set
    # CONFIG_HOSTESS_SV11 is not set
    # CONFIG_COSA is not set
    # CONFIG_WAN_DRIVERS is not set
    # CONFIG_LAPBETHER is not set
    # CONFIG_X25_ASY is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_SERIAL=y
    # CONFIG_SERIAL_CONSOLE is not set
    # CONFIG_SERIAL_EXTENDED is not set
    # CONFIG_SERIAL_NONSTANDARD is not set
    # CONFIG_UNIX98_PTYS is not set
    CONFIG_PRINTER=m
    CONFIG_PRINTER_READBACK=y
    # CONFIG_MOUSE is not set
    # CONFIG_QIC02_TAPE is not set
    # CONFIG_WATCHDOG is not set
    # CONFIG_NVRAM is not set
    # CONFIG_RTC is not set

    #
    # Video For Linux
    #
    CONFIG_VIDEO_DEV=y
    # CONFIG_RADIO_RTRACK is not set
    # CONFIG_RADIO_RTRACK2 is not set
    # CONFIG_RADIO_AZTECH is not set
    # CONFIG_RADIO_MIROPCM20 is not set
    # CONFIG_RADIO_GEMTEK is not set
    # CONFIG_VIDEO_BT848 is not set
    CONFIG_VIDEO_BWQCAM=m
    # CONFIG_VIDEO_CQCAM is not set
    # CONFIG_VIDEO_PMS is not set
    # CONFIG_VIDEO_SAA5249 is not set
    # CONFIG_RADIO_SF16FMI is not set
    # CONFIG_RADIO_ZOLTRIX is not set

    #
    # Joystick support
    #
    # CONFIG_JOYSTICK is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set

    #
    # Filesystems
    #
    CONFIG_QUOTA=y
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    # CONFIG_UMSDOS_FS is not set
    CONFIG_VFAT_FS=y
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_MINIX_FS is not set
    CONFIG_NTFS_FS=y
    # CONFIG_HPFS_FS is not set
    CONFIG_PROC_FS=y
    # CONFIG_ROMFS_FS is not set
    CONFIG_EXT2_FS=y
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    # CONFIG_CODA_FS is not set
    CONFIG_NFS_FS=y
    # CONFIG_NFSD_SUN is not set
    CONFIG_SUNRPC=y
    CONFIG_LOCKD=y
    # CONFIG_SMB_FS is not set
    # CONFIG_NCP_FS is not set

    #
    # Partition Types
    #
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MAC_PARTITION is not set
    # CONFIG_SMD_DISKLABEL is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    CONFIG_NLS=y

    #
    # Native Language Support
    #
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set

    #
    # Console drivers
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_VIDEO_SELECT is not set

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # Kernel hacking
    #
    # CONFIG_MAGIC_SYSRQ is not set
    Linux version 2.2.0-pre4-ac1 (root@rs229032) (gcc version 2.7.2.3) #1 Sun Jan 3 22:03:12 EST 1999
    Detected 350798892 Hz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 349.80 BogoMIPS
    Memory: 127860k/131072k available (992k kernel code, 412k reserved, 1752k data, 56k init)
    VFS: Diskquotas version dquot_6.4.0 initialized
    CPU: Intel Pentium II (Deschutes) stepping 01
    Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
    PCI: PCI BIOS revision 2.10 entry at 0xfdb81
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Enabling I/O for device 00:3a
    Swansea University Computer Society NET3.039 for Linux 2.1
    NET3: Unix domain sockets 0.16 for Linux NET3.038.
    Swansea University Computer Society TCP/IP for NET3.037
    IP Protocols: ICMP, UDP, TCP
    Starting kswapd v 1.5
    parport0: PC-style at 0x378 [SPP]
    Serial driver version 4.27 with no serial options enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    Linux video capture interface: v1.00
    PIIX4: IDE controller on PCI bus 00 dev 39
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    hda: WDC AC34300L, ATA DISK drive
    hdb: WDC AC310100B, ATA DISK drive
    hdc: FX162T4, ATAPI CDROM drive
    hdd: QUANTUM ELS127A, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: WDC AC34300L, 4104MB w/256kB Cache, CHS=523/255/63, UDMA
    hdb: WDC AC310100B, 9671MB w/512kB Cache, CHS=1232/255/63, UDMA
    hdd: QUANTUM ELS127A, 122MB w/32kB Cache, CHS=919/16/17
    hdc: ATAPI 16X CDROM drive, 128kB Cache
    Uniform CDROM driver Revision: 2.51
    Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
    FDC 0 is a National Semiconductor PC87306
    ppa: Version 2.03 (for Linux 2.0.0)
    ppa: Found device at ID 6, Attempting to use EPP 32 bit
    ppa: Found device at ID 6, Attempting to use SPP
    ppa: Communication established with ID 6 using SPP
    scsi0 : AdvanSys SCSI 3.1E: PCI Ultra-Wide: BIOS C8000/7FFF, IO EF00/3F, IRQ 11
    scsi1 : Iomega VPI0 (ppa) interface
    scsi : 2 hosts.
    Vendor: HP Model: C5110A Rev: 3638
    Type: Processor ANSI SCSI revision: 02
    Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
    Vendor: IOMEGA Model: ZIP 100 Rev: D.09
    Type: Direct-Access ANSI SCSI revision: 02
    Detected scsi removable disk sda at scsi1, channel 0, id 6, lun 0
    scsi : detected 1 SCSI disk total.
    sda : READ CAPACITY failed.
    sda : status = 0, message = 00, host = 0, driver = 28
    sda : extended sense code = 2
    sda : block size assumed to be 512 bytes, disk size 1GB.
    eth0: 3Com 3c905 Boomerang 100baseTx at 0xee80, 00:60:08:c6:3d:4a, IRQ 9
    8K word-wide RAM 3:5 Rx:Tx split, NWay Autonegotiation interface.
    MII transceiver found at address 24, status 7869.
    Enabling bus-master transmits and whole-frame receives.
    3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
    Partition check:
    sda:scsidisk I/O error: dev 08:00, sector 0
    unable to read partition table
    hda: hda1 hda2 < hda5 > hda3
    hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 >
    hdd: hdd1
    NTFS version 990102
    VFS: Mounted root (ext2 filesystem) readonly.
    Freeing unused kernel memory: 56k freed
    Adding Swap: 130748k swap-space (priority -1)
    Adding Swap: 124968k swap-space (priority -2)
    TIOCSER?WILD ioctl obsolete, ignored.
    TIOCSER?WILD ioctl obsolete, ignored.
    \
     
     \ /
      Last update: 2005-03-22 13:49    [W:0.049 / U:65.728 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site